M2/eom2/satdemod, 16qam demodulator card option, M2/eom2/ip, ip output card option – TANDBERG E5714 User Manual

Page 263

Advertising
background image

Technical Specification

Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder

Page B-27

ST.TM.E10076.3

B.10.7 M2/EOM2/SATDEMOD, 16QAM Demodulator Card

Option

NOTE…
The M2/EOM2/SATDEMOD, 16QAM Demodulator Card Option is supported by Encoder software

version 3.1 and later.

Table B.44: L-band Inputs (16QAM Demodulator)

Item

Specification

Safety Status:

SELV

Connector Type:

F-type Female

Connector Designation:

L-Band Input 1, L-Band Input 2

Input Impedance:

75

W

Input Power (maximum):

-25 dBm

Capture Range:

Up to ± 3.5 MHz

Signal Type:

QPSK as per EN 300 421 (DVB-S)
BPSK/16QAM as per EN 301 210 (DVB-DSNG) (option)

Symbol Rate:

1 – 45 Msym/s

B.10.8 M2/EOM2/IP, IP Output Card Option

NOTE…
The M2/EOM2/IP, IP Output Card Option is supported by Encoder software version 3.1 and later.

Table B.45: Ethernet Port (IP Output Card)

Item

Specification

Safety Status:

SELV

Connector Type:

8-way RJ-45

Connector Designation:

10/100 BT

Signal Type:

10/100-baseT Ethernet (IEEE 802.3/802.3u)

Transport Stream Rate:

Up to 50 Mbit/s

Advertising
This manual is related to the following products: