Limitations on number of option modules (2u only), Overview, E5740 option slots – TANDBERG E5714 User Manual

Page 54: E5750 option slots, Limitations on use of option modules, How to see which options are fitted/enabled, 3 limitations on use of option modules, 4 how to see which options are fitted/enabled

Advertising
background image

Options and Upgrades

Page 3-4

Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder

ST.TM.E10076.3

Table 3.2: Software Options

Marketing Code

Name

Used
in 1U

Used
in 2U

M2/ESO2/NR

Noise Reduction

4

4

M2/ESO2/PU

Performance Upgrade/Bit-rate <1.5 Mbit/s

4

4

M2/ESO2/VBR

VBR Licence

4

4

M2/ESO2/422

4:2:2

4

4

M2/ESO2/RAS

RAS (Remote Authorisation System)

4

4

M2/ESO2/ACON

Auto Concatenation

4

4

M2/ESO2/AC3

Dolby Digital (AC-3)

4

4

M2/ESO2/SM38PSK

8PSK Modulation

4

M2/ESO2/SM316QAM

16QAM Modulation

4

M2/ESO2/8PSKDEMOD 8PSK Demodulation (only applicable if M2/EOM2/SAT

DEMOD is fitted)

4

M2/ESO2/16QAM
DEMOD

16QAM Demodulation (only applicable if
M2/EOM2/SATDEMOD is fitted)

4

M2/ESO2/LSYM

Low Symbol Rate operation (minimum reduced to 300 ksym/s) —

4

3.1.2

Limitations on Number of Option Modules (2U Only)

Overview

If the Remux option is not fitted then there can be a maximum of three

option modules (any combination of additional audio and data).
If the Remux option module is fitted there can be a maximum of two other

option modules (any combination of additional audio and data).

E5740 Option Slots

Base Board

Option Slot 4

Option Slot 5

Option Slot 6

Option Slot 1

Satellite Modulator

E5750 Option Slots

Base Board

Option Slot 4

Option Slot 5

OFDM Modulator

Option Slot 1

Option Slot 2

Option Slot 3

3.1.3

Limitations on Use of Option Modules

Although both BISS (M2/EDCOM2/BISS) and RAS (M2/ESO2/RAS) may be

present in the Encoder, only one may be used at a time.

3.1.4

How to See Which Options are Fitted/Enabled

The Encoder has a number of hardware and software options (see Table 3.1

and Table 3.2). To see which are fitted/enabled refer to the Build Menu

(see Chapter 4, Operating the Equipment Locally, Figure 4.9).

Advertising
This manual is related to the following products: