20 power management data register, 21 general control register – Texas Instruments Dual/Single Socket CardBus and UntraMedia Controller PCI7621 User Manual

Page 251

Advertising
background image

11−13

11.20 Power Management Data Register

The power management bridge support extension register provides extended power-management features not
applicable to the flash media controller; thus, it is read-only and returns 0 when read.

Bit

7

6

5

4

3

2

1

0

Name

Power management data

Type

R

R

R

R

R

R

R

R

Default

0

0

0

0

0

0

0

0

Register:

Power management data

Offset:

4Bh

Type:

Read-only

Default:

00h

11.21 General Control Register

The general control register provides miscellaneous PCI-related configuration. See Table 11−14 for a complete
description of the register contents.

Bit

7

6

5

4

3

2

1

0

Name

General control

Type

R

R

R

RW

RW

RW

RW

RW

Default

0

0

0

0

0

0

0

0

Register:

General control

Offset:

4Ch

Type:

Read/Write, Read-only

Default:

00h

Table 11−14. General Control Register

BIT

FIELD NAME

TYPE

DESCRIPTION

7

RSVD

R

Reserved. Bit 7 returns 0 when read.

6−5 ‡

INT_SEL

RW

Interrupt select. These bits are program the INTPIN register and set which interrupt output is used.
This field is ignored if one of the USE_INTx terminals is asserted.

00 = INTA
01 = INTB
10 = INTC
11 = INTD

4 ‡

D3_COLD

RW

D3cold PME support. This bit sets and clears the D3cold PME support bit in the power management
capabilities register.

3

RSVD

R

Reserved. Bit 3 returns 0 when read.

2 ‡

SM_DIS

RW

SmartMedia disable. Setting this bit disables support for SmartMedia cards. The flash media
controller reports a SmardMedia card as an unsupported card if this bit is set. If this bit is set, then
all of the SM_SUPPORT bits in the socket enumeration register are 0.

1 ‡

MMC_SD_DIS

RW

MMC/SD disable. Setting this bit disables support for MMC/SD cards. The flash media controller
reports a MMC/SD card as an unsupported card if this bit is set. If this bit is set, then all of the
SD_SUPPORT bits in the socket enumeration register are 0.

0 ‡

MS_DIS

RW

Memory Stick disable. Setting this bit disables support for Memory Stick cards. The flash media
controller reports a Memory Stick card as an unsupported card if this bit is set. If this bit is set, then
all of the MS_SUPPORT bits in the socket enumeration register are 0.

‡ One or more bits in this register are cleared only by the assertion of GRST.

Advertising