Tripp Lite 93-2879 - Manual (Page 141)

_____________________________________________________________________
B096-016 B096-048 and B092-016 User Manual Page 141
This will reset the Console Server back to its factory default settings and clear the Console Server’s
stored configuration information.
The hard erase will clear all custom settings and
return the unit back to factory default settings (i.e.
the IP address will be reset to 192.168.0.1).
You will be prompted to log in and must enter the
default administration username and
administration password:
Username: root
Password: default
11.2 Upgrade Firmware
Before upgrading, check if you are already running the most current firmware in your Console Server.
Your Console Server will not allow you to upgrade to the same or an earlier version.
The Firmware version is displayed in the header of each page
Or select Status: Support Report and note the Firmware Version
To upgrade, you must first download the latest firmware image from
http://www.tripplite.com/EN/support/downloads/driver-firmware-downloads.cfm
Save this downloaded firmware image file on to a system on the same subnet as the Console
Server
Also download and read the release_notes.txt for the latest information
To then upload the firmware image file to your Console Server, select System: Firmware