Tripp Lite 93-2879 - Manual (Page 169)

_____________________________________________________________________
B096-016 B096-048 and B092-016 User Manual Page 169
15.1 Advanced Portmanager
pmshell
The pmshell command acts similarly to the standard tip or cu commands, but all serial port
access is directed via the portmanager.
Example:
To connect to port 8 via the portmanager:
# pmshell -l port08
pmshell Commands:
Once connected, the pmshell command supports a subset of the '~' escape commands that
tip/cu support. For SSH, you must prefix the escape with an additional ‘~’ command (i.e. use the
‘~~’ escape)
Send Break:
Typing the character sequence '~b' will generate a BREAK on the serial port.
History:
Typing the character sequence '~h' will generate a history on the serial port.
Quit pmshell:
Typing the character sequence '~.' will exit from pmshell.
Set RTS to 1 run the command:
# pmshell --rts=1
Show all signa
# pmshell –signals
DSR=1 DTR=1 CTS=1 RTS=1 DCD=0
Read a line of text from the serial port:
# pmshell –getline