Tripp Lite 93-2879 - Manual (Page 9)

9
1. INTRODUCTION
This Manual
This User Manual is provided to help you get the most from your B096-016 / B096-048 Console Server
Management Switch or B092-016 Console Server with PowerAlert product. These products are referred
to generically in this manual as Console Servers.
Once configured, you will be able to use your Console Server to securely monitor, access and control the
computers, networking devices, telecommunications equipment, power supplies and operating
environment in your data center, branch office or communications room. This manual guides you in
managing this infrastructure locally (at the rack side or across your operations or management LAN or
through the local serial console port), and remotely (across the Internet, private network or via dial up).
FCC Information
This is an FCC Class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures. This equipment has been tested and
found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case
the user will be required to correct the interference at his own expense.
RoHS
This product is RoHS compliant.
User Notice
All information, documentation and specifications contained in this manual are subject to change
without prior notification by the manufacturer. The manufacturer makes no representations or
warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims
any warranties as to merchantability or fitness for any particular purpose. Any of the manufacturer's
software described in this manual is sold or licensed `as is'. Should the programs prove defective
following their purchase, the buyer (and not the manufacturer, its distributor, or its dealer), assumes the
entire cost of all necessary servicing, repair and any incidental or consequential damages resulting from
any defect in the software.
The manufacturer of this system is not responsible for any radio and/or TV interference caused by
unauthorized modifications to this device. It is the responsibility of the user to correct such interference.
The manufacturer is not responsible for any damage incurred in the operation of this system if the
correct operational voltage setting was not selected prior to operation.
RODUCTION