Tripp Lite 93-2879 - Manual (Page 148)

_____________________________________________________________________
B096-016 B096-048 and B092-016 User Manual Page 148
Click Connect to SDT Connector to access the Console Server command line shell or the serial
ports via SDT Connector. This will activate the SDT Connector client on the computer you are
browsing and load your local Telnet client to connect to the command line or serial port using
SSH
Note Tripp Lite SDT Connector must be installed on the computer from which you are browsing and
the Console Server must be added as a gateway, as detailed in Chapter 6
The alternative to using SDT Connector and your local Telnet client is to download the open source
jcterm java terminal applet into your browser in order to connect to the Console Server and attached
serial port devices. However jcterm does have some JRE compatibility issues which may prevent it from
loading.
Select Manage: Terminal. The jcterm java applet is downloaded from the Console Server to your
browser and the virtual terminal will be displayed
Select File -> Open SHELL Session from the jcterm menu to access the command line using SSH