Tripp Lite 93-2879 - Manual (Page 29)

29
A message may appear about the host key fingerprint.
You will need to select ‘Yes’ or ‘Always’ to continue.
The next step is password authentication. You will be
prompted for your username and password from the
remote system. You will then be logged on to the Console
Server
3.6 Management Network Configuration (B096-048/016 only)
The B096-048/016 Console Server Management Switches have a second Ethernet network port that can
be configured as a management Console Server/LAN port or as a failover/OoB access port.
3.6.1 Configure Management Switch as a Management LAN gateway
The Management Switch in the B096-048/016 Console Servers can be configured to provide a
management LAN gateway. With this configuration, the B096-048/016 provides firewall, router and
DHCP server features and you can connect managed hosts to this management LAN.
These features are all disabled by default. To configure the Management LAN gateway:
Select the Management LAN page on the System: IP menu and uncheck Disable
Configure the IP Address and Subnet Mask for the Management LAN (leaving the Gateway and
DNS fields blank) then click Apply
The management LAN gateway function is now enabled with default firewall and router rules.
These rules can be reconfigured at the command line.