Tripp Lite 93-2879 - Manual (Page 162)

_____________________________________________________________________
B096-016 B096-048 and B092-016 User Manual Page 162
# /bin/config –-set=config.portaccess.rule2.netmask=255.255.255.0
# /bin/config –-set=”config.portaccess.rule2.description=foo bar.”
# /bin/config –-set=config.portaccess.rule2.port5=on
# /bin/config –-set=config.portaccess.total=2
Please note that this rule becomes live straight away.
14.6 Event Logging Configuration
Remote Serial Port Log Storage
To setup remote storage of serial port 5 log to a remote Windows share with the following
properties:
IP Address 192.168.0.254
Directory C:\\tripplite\logs\
Username cifs_user
Password secret
Logging level 2 (input/output logging as well as user
connections & disconnections)
The following commands must be issued:
# /bin/config –-set=config.eventlog.server.type=cifs
# /bin/config –-set=config.eventlog.server.address=192.168.0.254
# /bin/config –-set=config.eventlog.server.path=/tripplite/logs
# /bin/config –-set=config.eventlog.server.username=cifs_user
# /bin/config –-set=config.eventlog.server.password=secret
# /bin/config –-set=config.ports.port5.loglevel=2
The following command will synchronize the live system with the new configuration.
# /bin/config –-run=eventlog
Note that supported remote storage server types are 'None', 'cifs', 'nfs' and 'syslog'.
Supported port logging levels are '0', '1' and '2'.