Tripp Lite 93-2879 - Manual (Page 178)

_____________________________________________________________________
B096-016 B096-048 and B092-016 User Manual Page 178
To set the Engine ID field (SNMP version 3 only)
config --set config.system.snmp.engineid2=800000020109840301
.. replacing 800000020109840301 with the engine ID
To set the Username field (SNMP version 3 only)
config --set config.system.snmp.username2=yourusername
.. replacing yourusername with the username
config.system.snmp.username2 (3 only)
To set the Engine ID field (SNMP version 3 only)
config --set config.system.snmp.password2=yourpassword
.. replacing yourpassword with the password
Once the fields are set, apply the configuration with the following command:
config --run snmp
You can add a third or more SNMP servers by incrementing the "2" in the above commands,
e.g. config.system.snmp.protocol3, config.system.snmp.address3, etc.
15.6 Secure Shell (SSH) Public Key Authentication
This section covers the generation of public and private keys in a Linux and Windows
environment and configuring SSH for public key authentication. The steps to use in a Clustering
environment are:
- Generate a new public and private key pair
- Upload the keys to the Master and to each Slave Console Server
- Fingerprint each connection to validate
SSH Overview
Popular TCP/IP applications such as Telnet, rlogin, ftp, and others transmit their passwords
unencrypted. Doing this across public networks like the Internet can have catastrophic
consequences. It leaves the door open for eavesdropping, connection hijacking, and other
network-level attacks.
Secure Shell (SSH) is a program to log into another computer over a network, to execute
commands in a remote machine, and to move files from one machine to another. It provides
strong authentication and secure communications over unsecure channels.