Technics sx-PR604/M - Manual (Page 111)

Easy Edit
The most commonly used edit functions are consolidated on one display, providing convenient and quick editing operation.
1. On the SOUND EDIT menu display, select
EASY EDIT.
• The display changes to the following.
2 Use the buttons below the display to specify
the value of the attribute.
• An effect may remain unchanged when EASY EDIT is
used to set the value, if another EDIT function was first
used to set the value to its upper or lower limit.
3. Press the WRITE button to store your new
sound.
• Storing your new sound is explained on page 119.
• If a sound is stored in the EASY EDIT mode, and is later
selected in the EASY EDIT mode, the displayed value of
an attribute may be different from the value when it was
stored. The sound itself, however, is exactly as it was
stored.
Tone Edit
Modify the separate tones which comprise the sound.
About tones
A sound may be made up of at most four tones.
• A special process is used to produce real-sounding piano
type tones. For this reason, some edit procedures for
piano sounds, FILTER or AMPLITUDE for example, may
differ from those for other sounds.
TONE SELECT
1. On the SOUND EDIT menu, select TONE.
• The display looks similar to the following.
2. Use the buttons to the left of the display to
select the tone you wish to edit (1st, 2nd, 3rd,
4th).
• Use the ON/OFF buttons to select ON or OFF.
3. Select a sound for the tone.
• Use the GROUP
∧
and
∨
buttons to select the group,
and the TONE NAME
∧
and
∨
buttons to select the
sound.
• A “ * ” mark in the TONE DYNAM column indicates that a
TONE DYNAMICS change was made to the sound.
4. Use the LEVEL
∧
and
∨
buttons to adjust the
volume.
5. Use the KEY
∧
and
∨
buttons to set the pitch
of the output sound.
BRILLIANCE:
Adjust the brightness of the sound.
VIBRATO DEPTH:
Set vibrato depth.
VIBRATO SPEED:
Set vibrato speed.
VIBRATO DELAY:
Set time delay between key played and vibrato start.
OCT SHIFT:
Shift the octave range.
ATTACK:
Adjust attack time.
RELEASE:
Adjust time of sound fade-out after key is released.
DIG.EFFECT:
Select type of effect. (Refer to page 118.)
Easy Edit items
SOUND
1st tone
3rd tone
2nd tone
4th tone
S
o
un
d E
d
it
Part IX Sound Edit
111
QQTG0665