Technics sx-PR604/M - Manual (Page 131)

Mode Setting
Initialize the settings for when the NX SOUND or GM LEVEL 2 mode is ON.
1. On the MIDI MENU display, select MODE
SETTING.
• The display looks similar to the following.
2. Select the mode.
• There are two modes for GM LEVEL 2 depending on the
parts to use.
• The confirmation display appears. Press the YES button
to execute the function, or press the NO button to cancel
the function.
• When using an external sequencer in GM LEVEL 2, select
<Ext. Sequencer> in the MIDI PRESETS options.
Input/output Setting
Make the settings which determine how various performance data is treated during data transmission and reception.
1. On the MIDI MENU display, select
INPUT/OUTPUT SETTING.
• The display looks similar to the following.
2. Use the ▲ and ▼ buttons to select the item.
RIGHT 1 INPUT
CONDUCTOR:
When data for the RIGHT 1 part is received, the CON-
DUCTOR determines which part it is used for.
DIRECT:
When data for the RIGHT 1 part is received, it is
treated as RIGHT 1 data, and performance data for
all parts is received on their respective basic chan-
nels.
AUTO PLAY CHORD INPUT
ON: Input data for the ACCOMP, BASS, DRUMS and
CHORD parts is received.
OFF: Data for the above parts is not received.
• MIDI channels should be assigned to the above parts
before exchanging data.
VELOCITY INPUT
DIRECT:
The VELOCITY value of received NOTE ON data is
treated as is.
OFFSET:
The VELOCITY value of received NOTE ON data is
offset (–50 to 50).
• Select VELOCITY OFFSET VALUE. Use the
∧
and
∨
buttons to change the value.
• All the values are offset from the current value by
the fixed amount.
• The upper (127) and lower (1) limits cannot be
exceeded.
FIX:
The VELOCITY value of all received NOTE ON data
is set to a fixed value. (1 to 127)
• Select VELOCITY FIXED VALUE. Use the
∧
and
∨
buttons to change the value.
TECHNI-CHORD OUTPUT
ON: Keyboard notes generated by the TECHNI-CHORD
function are also transmitted.
OFF: Only key note data of the pressed keys is trans-
mitted.
TRANSPOSE OUTPUT
ON: The note data of the transposed notes is trans-
mitted.
OFF: The note data of the played keys is transmitted.
DRUM PATTERN OUTPUT
ON: Data from the DRUMS part is transmitted.
OFF: Data from the DRUMS part is not transmitted.
AUTO PLAY CHORD OUTPUT
ON: The data for the ACCOMP, BASS and CHORD
parts is transmitted.
OFF: The data for the above parts is not transmitted.
• MIDI channels should be assigned to the above parts
before exchanging data.
AUTO OCTAVE SHIFT OUTPUT
ON: If the octave has been automatically changed, the
data of the transposed notes is transmitted, depend-
ing on the sound.
OFF: The note data of the played keys is transmitted.
3. Use the
∧
and
∨
buttons to select the setting.
4. Repeat steps 2 and 3 for each item as desired.
MID
I
Part XII MIDI
131
QQTG0665