Technics sx-PR604/M - Manual (Page 55)

Panel Memory
PANEL MEMORY stores all the current panel settings so you can recall them at the push of a button.
How to store the panel settings
Store up to 24 panel settings (3 banks x 8 memories). By
storing all the panel settings you use for a song in the same
bank, for example, you can switch from one panel setup to
the next in a flash.
1. Set up the desired panel settings (sounds,
volumes, etc.)
2. Press the BANK VIEW button to turn it on.
• The BANK SELECT display appears.
3. Use the buttons to the left of the display to
select the desired bank (A, B, C).
4. With the SET button held down, press one of
the numbered buttons of the PANEL
MEMORY (1 to 8).
• The panel settings are now stored in the specified bank
and number.
BANK VIEW
After selecting a bank, you can use the PAGE buttons to go
to the PAGE2 BANK VIEW page and confirm the memory
names of that bank’s 8 memories.
• You can use the BANK
∧
and
∨
buttons to view other
banks.
• You can also access this display by pressing and holding
any of the PANEL MEMORY number buttons (1 to 8) for
a few seconds.
Assign a name to the bank/memory
You can assign names to the banks and memories.
1. Select a bank or memory.
2. Use the PAGE buttons to go to the PAGE2/2
BANK VIEW page on the display.
3. Press the BANK NAMING button to assign a
name to the bank, or the MEMORY NAMING
button for the memory.
• The display looks similar to the following.
4. Assign a name.
• Press the ABC button to enter alphabetical characters.
While the SHIFT button is pressed, upper case letters are
entered.
• Press the 123 button to enter numbers, etc. While the
SHIFT button is pressed, you can enter symbols.
• Press the POSITION button to move the cursor.
• You can also use the TEMPO/PROGRAM dial to select
the characters.
• Press the INS button to enter a space at the cursor
position.
• Press the DEL button to erase the character at the cursor
position.
• Press the CLR button to erase the entire name.
• Press the →← button to center the name.
5. When you have finished assigning the name,
press the OK button.
DEMO SPLIT
POINT
MAIN VOLUME APC/SEQUENCER VOLUME
MODE
CHORD FINDER
OFF/ON AUTO SETTING BANK STOP 8&16
BEAT ROCK & POP BALLAD JAZZ & SWING MOVIE & SHOW
SOUND ARRANGER PIANO STYLIST TEMPO / PROGRAM PROGRESSIVE PIANIST
ONE TOUCH PLAY SIMPLE PIANO FADE IN OUT
INTRO & ENDING START / STOP SYNCHRO START
TAP TEMPO
FILL IN 1 2 1 1 2 3 4 BEAT 2
METRONOME SET OFF/ON
1 2 3 4
VARIATION MUSIC STYLE ARRANGER
GOSPEL
& BLUES SOUL &
DISCO COUNTRY & WESTERN LATIN &
WORLD MARCH & WALTZ MEMORY
LOAD 1 2 3
4 5 6
MAX
MIN
MAX
OFF
SOLO SOLO
RHYTHM GROUP
SAX & WOODWIND ORGAN & ACCORDION SOUND EXPLORER BRASS SYNTH SOLOIST MULTI EFFECT CHORUS REVERB PLAY EASY REC
SET NEXT BANK BANK VIEW
PROGRAM MENUS DISK
LOAD CHORD STEP REC
DISK IN USE
SOLO TECHNI-CHORD DIGITAL EFFECT BRILLIANCE
STRINGS TRANSPOSE R1/R2 OCTAVE
–
PART SELECT
CONDUCTOR PANEL MEMORY
LEFT RIGHT 2 RIGHT 1
LEFT RIGHT 2 RIGHT 1
+ – +
GRAND UPRIGHT ELECTRIC MODERN 1 2 3 4 5 6 7 8 DIGITAL DRAWBAR
VOCAL BASS DRUM KITS MIXTURES MEMORY GUITAR & HARPSI MALLET & ORCH PERC
SOUND GROUP EFFECT THEATRE SONIC SEQUENCER
PIANO
PIANO PERFORMANCE PADS AUTO PLAY CHORD
FAVORITES
OTHER PARTS/TR HELP DISPLAY HOLD EXIT LCD CONTRAST PAGE MUTE SEQUENCER RESET COUNT
INTRO
SX-PR804
SET NEXT BANK BANK VIEW
SET
PANEL MEMORY
1 2 3 4 5 6 7 8
P
la
y
in
g
t
h
e r
h
yt
h
m
Part II Playing the rhythm
55
QQTG0665