Store the new sound, Procedure, Select a new sound – Technics sx-PR604/M User Manual

Page 119: Part ix sound edit

Advertising
background image

Store the new sound

The MEMORY button in the SOUND GROUP section accesses memory banks reserved for the sounds you create with the SOUND
EDIT. You can store up to 40 original sounds then select the sounds just like the other sounds in the SOUND GROUP.

Procedure

1.

When you have edited the sound to just the
way you like it, on the SOUND EDIT menu
display press the WRITE button.

• The display changes to the MEMORY WRITE display.

2.

To assign a name to your new sound, press
the SOUND NAMING button.

• If you do not assign a name to your sound, the name

becomes the same as the original sound from which you
started. In this case, skip to step 5.

• The display changes to the SOUND NAMING display.

3.

Use the buttons below the display to assign a
name.

• Press the ABC button to enter alphabetical characters.

While the SHIFT button is pressed, upper case letters are
entered.

• Press the 123 button to enter numbers, etc. While the

SHIFT button is pressed, you can enter symbols.

• Press the POSITION button to move the cursor.

• You can also use the TEMPO/PROGRAM dial to select

the characters.

• Press the INS button to enter a space at the cursor

position.

• Press the DEL button to erase the character at the cursor

position.

• Press the CLR button to erase the entire name.

• Press the →← button to center the name.

4.

When you have finished typing the name,
press the OK button.

• The display returns to the MEMORY WRITE display.

5.

Use the

and

buttons to select the

MEMORY number in which to store the new
sound (1–40).

6.

Press the OK button.

• The new sound is stored, and “COMPLETED!” is shown

on the display.

• The SOUND EDIT mode is turned off.

• The stored sound memories can be saved on a disk for

recall at a later time. (Refer to page 99.)

Select a new sound

You can select your original sound just like the other sounds
in the SOUND GROUP.

1.

In the SOUND GROUP section, press the
MEMORY button.

• The list of sounds is shown on the display.

2.

Select the desired sound from the list on the
display.

SAX &

WOODWIND

ORGAN &

ACCORDION

SOUND

EXPLORER

BRASS

SYNTH

SOLOIST

STRINGS

VOCAL

BASS

DRUM KITS

MIXTURES

MEMORY

GUITAR

& HARPSI

MALLET &

ORCH PERC

SOUND GROUP

S

o

un

d E

d

it

Part IX

Sound Edit

119

QQTG0665

Advertising
This manual is related to the following products: