Technics sx-PR604/M - Manual (Page 83)

VELOCITY CHANGE
Modify the recorded velocity in specific measures of specific
tracks.
1. Use the TRACK
∧
and
∨
buttons to select the
track you wish to edit.
• You cannot select the track for the CONTROL, RHYTHM
or CHORD part.
• If ALL is selected, all tracks will be edited.
2. Use the FIRST MEASURE
∧
and
∨
buttons
to specify the start point (measure number) of
the velocity change.
3. Use the LAST MEASURE
∧
and
∨
buttons to
specify the end point (measure number) of the
velocity change.
4. Use the VELOCITY
∧
and
∨
buttons to specify
the change in velocity.
• The value you select will be added to or deleted from the
current velocity.
5. Press the OK button.
• The confirmation display appears. Press the YES button
to execute the function, or press the NO button to cancel
the function.
TRANSPOSE
Change of key of specific measures of specific tracks.
1. Use the TRACK
∧
and
∨
buttons to select the
track you wish to edit.
• You cannot select the track for the CONTROL, RHYTHM
or CHORD part.
• If ALL is selected, all tracks will be edited.
2. Use the FIRST MEASURE
∧
and
∨
buttons
to specify the start point (measure number) of
the transpose.
3. Use the LAST MEASURE
∧
and
∨
buttons to
specify the end point (measure number) of the
transpose.
4. Use the TRANSPOSE
∧
and
∨
buttons to
specify the change in pitch.
• Increments are in semitones. A value of 12 is one octave.
A – value lowers the pitch, and a + value raises it.
5. Press the OK button.
• The confirmation display appears. Press the YES button
to execute the function, or press the NO button to cancel
the function.
NOTE CHANGE
Change of pitch of specified notes.
1. Use the TRACK
∧
and
∨
buttons to select the
track you wish to edit.
• You cannot select the track for the CONTROL, RHYTHM
or CHORD part.
• If ALL is selected, all tracks will be edited.
2. Use the FIRST MEASURE
∧
and
∨
buttons
to specify the start point (measure number) of
the note change.
3. Use the LAST MEASURE
∧
and
∨
buttons to
specify the end point (measure number) of the
note change.
4. Use the TARGET NOTE
∧
and
∨
buttons to
specify the pitch of the note you wish to
change.
• The number next to the note name is its note number.
5. Use the CHANGE TO
∧
and
∨
buttons to
specify the pitch you wish to change to.
6. Press the OK button.
• The confirmation display appears. Press the YES button
to execute the function, or press the NO button to cancel
the function.
Se
q
u
e
n
c
e
r
Part IV Sequencer
83
QQTG0665