Yamaha MOTIF XS7 EN - Manual (Page 149)

Editing a Performance
MOTIF XS Owner’s Manual 149
V
oice mode
Song mode
P
attern mode
Mixing mode
Master mode
Utility mode
File mode
P
erf
ormance mode
Sampling
mode 1
Sampling
mode 2
Ref
erence
n Depending on the selected parameter, the LIST icon is shown
at the tab menu corresponding to the [SF6] button. In this
condition, you can call up the list by pressing the [SF6] LIST
button, then select the desired item from the list. For details
see page 82.
1 Category
2 Type
From the Category column, you can select one of the Effect
Categories each of which contains similar Effect types.
From the Type column, you can select one of the Effect
Types listed in the selected Category.
Settings: Details about the Effect categories and types are described
on page 70.
3 Preset
You can set various parameters in order to change how the
sound is affected by the selected Effect type. This
parameter lets you call up the pre-programmed settings of
these effect parameters.
4 Effect Parameters
The number of parameters and values available differs
depending on the currently selected effect type. Refer to
page 73 for details about the Effect parameters. Refer to
the separate Data List booklet for information on the
parameters for each Effect type.
Effect settings—[F5] Effect
From the following displays, you can set the Effect
connection and values of other parameters. For details
about the structure in the Performance mode, see page 69.
This display gives you at-a-glance, overall view of the
effect routing and comprehensive control over the effects.
n Depending on the selected parameter, the LIST icon is shown
at the tab menu corresponding to the [SF6] button. In this
condition, you can call up the list by pressing the [SF6] LIST
button, then select the desired item from the list. For details
see page 82.
1 Chorus (Chorus Category/Type)
Selects a Chorus Effect type after selecting a category.
From the Category column, you can select one of the Effect
categories, each of which contains similar Effect types.
From the Type column, you can select one of the Effect
types listed in the selected category.
Settings: Details about the Effect categories and types are described
on page 70.
2 Reverb (Reverb Type)
Determines the Reverb Effect type. It is not necessary to
select a Category because there is only one category in
Reverb.
Settings: Details about the Effect types are described on page 70.
3 CHORUS TO REVERB
Determines the Send level of the signal sent from the
Chorus Effect to the Reverb Effect. The higher the value,
the deeper the Reverb that is applied to the Chorus-
processed signal.
Settings: 0 – 127
4 Chorus Return
Determines the Return level of the Chorus Effect.
Settings: 0 – 127
5 Chorus Pan
Determines the pan position of the Chorus effect sound.
Settings: L63 (far left) – C (center) – R63 (far right)
Effect Parameter settings—[SF3] Ins A,
[SF4] Ins B
1 2
3
4
Effect Connection settings—[SF1] Connect
3
4 5
2
1
6 7