F5] other jobs, Delete 03: extract 04: transpose – Yamaha MOTIF XS7 EN User Manual

Page 177

Advertising
background image

Creating a Voice/Performance by Using the Sampling Function

MOTIF XS Owner’s Manual

177

V

oice mode

Song mode

P

attern mode

Mixing mode

Master mode

Utility mode

File mode

P

erf

ormance

mode

Sampling

mode 1

Sampling

mode 2

Ref

erence

This Job lets you delete a specific Waveform from memory.
The Key Banks and Samples included in the Waveform are
also deleted.

Waveform

Determines the Waveform number to be deleted.

This Job lets you delete all unnecessary parts of the
Sample (located ahead of the Start Point and located after
the End Point).

Waveform

Determines the Waveform number to be extracted.

This Job lets you transpose the Key Bank setting of a
specified Waveform in semitones or in octaves.

1 Waveform

Determines the Waveform number to which this Job is
applied.

2 Octave

Determines the amount in octaves by which the Key Bank is
transposed. When you want to transpose by less than one
octave, set this to “0” and use the Note parameter below.

Settings: -3 – +0 – +3

3 Note

Determines the amount in semitones by which the Key Bank is
transposed. When you want to transpose by exact octaves,
set this to “0” and use the Octave parameter above.

Settings: -11 – +0 – +11

This Job lets you assign a name to the selected Waveform.

1 Waveform

Determines the Waveform number to which this Job is
applied.

2 Name

Determines the Waveform name which can contain up to
10 characters. For detailed instructions on naming, refer to
“Basic Operation” on page 82.

[F5] Other Jobs

This Job optimizes the memory (DIMM) for Sampling.
Optimization consolidates areas of used and unused
(available) memory to create the largest possible area of
contiguous available memory. In some cases, the amount
of remaining memory will be increased when you execute
the Optimize Memory Job.

This Job deletes all the user Waveforms. The Key Banks
and Samples included in the Waveform are also deleted.

02: Delete

03: Extract

04: Transpose

Start point

End point

Extract

Start point

End point

1
2

3

05: Rename

01: Optimize Memory

02: Delete All

1

2

Advertising
This manual is related to the following products: