Yamaha MOTIF XS7 EN - Manual (Page 256)

V
oice mode
Song mode
P
attern mode
Mixing mode
Master mode
Utility mode
File mode
P
erf
ormance
mode
Sampling
mode 1
Sampling
mode 2
Ref
erence
Using as a Master Keyboard (Master mode)
MOTIF XS Owner’s Manual 256
2 Int Prog Change (Internal Program Change)
Determines whether or not to transmit Program Change
messages to the internal tone generator.
3 Ext Bank Select (External Bank Select)
Determines whether or not to transmit Bank Select MSB/
LSB messages to the external tone generator via MIDI.
4 Ext Prog Change (External Program Change)
Determines whether or not to transmit Program Change
messages to the external tone generator via MIDI.
MIDI Transmit Switch for the Other messages
—[SF2] Control
From this display, you can determine whether or not MIDI
messages controlling non-Voice-related settings such as
Control Change, Pitch Bend and Channel Aftertouch are
transmitted to the internal/external tone generator.
When you wish to transmit a certain MIDI message from a
certain Zone to the internal/external tone generator,
checkmark the corresponding box.
1 Pitch Bend
MIDI messages generated by using the Pitch Bend Wheel.
2 Ch After Touch (Channel After Touch)
MIDI messages generated by pressing and holding a note
on the keyboard.
3 Modulation Wheel
MIDI messages generated by using the Modulation Wheel.
4 Ribbon Controller
MIDI messages generated by using the Ribbon Controller.
5 Foot Controller 1
6 Foot Controller 2
MIDI messages generated by using the optional Foot
Controller connected to the rear panel.
7 Sustain
MIDI messages generated by using the optional
Footswitch connected to the SUSTAIN jack on the rear
panel.
8 Foot Switch
MIDI messages generated by using the optional
Footswitch connected to the ASSIGNABLE jack on the rear
panel.
9 Knob
MIDI messages generated by using the Knobs.
) Slider
MIDI messages generated by using the Sliders.
! A. Function 1 (Assignable Function 1)
@ A. Function 2 (Assignable Function 2)
MIDI messages generated by using the ASSIGNABLE
FUNCTION buttons.
# Volume/Express (Expression)
MIDI Volume messages generated by using the Knobs and
Sliders.
$ Pan
MIDI Pan messages generated by using the Knobs and
Sliders.
From this display you can make the Voice-related settings
for each Zone which will be transmitted as MIDI messages
automatically when the Master is selected.
1 Bank MSB (Bank Select MSB)
2 Bank LSB (Bank Select LSB)
3 Program Change
Determines the Voice-related settings for each Zone in the
selected Master. These MIDI messages are transmitted to
an external/internal tone generator when the Master is
selected.
Settings:
Bank MSB (Bank Select MSB): 000 – 127
Bank LSB (Bank Select LSB): 000 – 127
Program Change: 001 – 128
1
2 3
5
7
9
!
#
4
6
8
)
@
$
Default Settings for each Zone—[F4]
Preset
1
2 3
5
4
6