Yamaha MOTIF XS7 EN - Manual (Page 46)

Connecting to
a Computer
Connecting to a Computer
MOTIF XS Owner’s Manual 46
Audio signal reception (*4)
The mLAN IN Main Out Monitor L/R and mLAN IN
Assignable Out Monitor L/R are available as well as the
mLAN IN L/R as the mLAN audio input channel of the
MOTIF XS. These channels can be used for monitoring the
sound when using the DAW software on the computer. The
audio signal received via the mLAN IN Main Out Monitor L/
R will be output via the OUTPUT L/R jacks while the audio
signal received via the mLAN IN Assignable Out Monitor L/
R will be output via the ASSIGNABLE OUTPUT L/R jacks.
Setting the audio output channel on the computer
determines which channel is used. As for audio signals
received via the mLAN connector, parameters such as
volume and output channel can be applied as the mLAN
audio input part of the MOTIF XS. The display of these
parameter settings differs depending on the mode, as
listed below.
[VOICE]
→ [UTILITY] → [F4] VoiceAudio → [SF1] Output →
mLAN setting (page 266)
[PERFORM] → [EDIT] → [COMMON EDIT] → [F4] Audio In →
[SF1] Output → mLAN setting (page 148)
[SONG]/[PATTERN]
→ [MIXING] → [EDIT] → [COMMON
EDIT] → [F4] Audio In → [SF1] Output → mLAN setting
(page 234)
mLAN Audio Channels of the MOTIF XS and
the computer
When connecting the MOTIF XS to a computer via an
IEEE1394 cable, set the audio channel of the computer
referring to the table below.
Input Channel of the MOTIF XS
Output Channel of
the computer
mLAN IN Main Out Monitor L, R 1, 2
mLAN IN L, R 3, 4
mLAN IN Assignable Out Monitor L, R 5, 6
Output Channel of the MOTIF XS
Input Channel of
the computer
mLAN OUT L, R (L&R)* 1, 2
mLAN OUT 1 – 14 (m1 – m14)* 3 – 16