Yamaha MOTIF XS7 EN - Manual (Page 226)

Pattern Jobs
MOTIF XS Owner’s Manual 226
V
oice mode
Song mode
P
attern mode
Mixing mode
Master mode
Utility mode
File mode
P
erf
ormance
mode
Sampling
mode 1
Sampling
mode 2
Ref
erence
2 Clear Sample Voice
When the checkbox is checked, the Sample Voice used in
the Phrase specified above will also be cleared.
Undo/Redo (page 196) cannot be used to undo/redo a Delete
sample operation.
[F5] Track Jobs
This Job copies all data of the selected type from a
specified source track to a specified destination track. This
is useful if you are creating a Pattern and wish to use the
track data from another Pattern.
1 Source Track
2 Destination Track
Determines the Pattern number (01 – 64), Section (A – P)
and Track (01 – 16) of source and destination respectively.
Any previous data in the copy destination will be overwritten.
3 Data Type to be copied
Determines the type(s) of data to be copied.
Settings: Sequencer Event (all events in the track), Play Effect, Mix
Part Parameter (all Mixing Part parameters), Sample Voice
n When there is no memory available in the destination Pattern
for Sample Voice data, an alert message will appear on the
display and the Sample Voice data will not be copied even
though the check box of the Sample Voice is marked. If this
occurs, use Sample Job 02: Delete to delete any unused
samples, then try again.
Undo/Redo (page 196) cannot be used to undo/redo a Delete
sample operation.
This is the same as in the Song Job mode. See page 205.
This is the same as in the Song Job mode. See page 205.
This Job deletes all data of the selected type from the
selected track.
1 Tracks
Determines the track to be cleared by specifying the
Section (A – P, all) and Track (01 – 16, all).
2 Data type to be cleared
Determines the type(s) of data to be cleared. Select the
desired type by checkmarking the appropriate box.
Settings: Sequencer Event (all events in the track), Play Effect, Mix
Part Parameter (all Mixing Part parameters), Sample Voice
Undo/Redo cannot be used to undo/redo a Clear operation for
tracks that contain sample data.
This is the same as in the Song Job mode. See page 205.
This is the same as in the Song Job mode. See page 205.
01: Copy Track
CAUTION
1
2
3
CAUTION
CAUTION
02: Exchange Track
03: Mix Track
04: Clear Track
05: Normalize Play Effect
06: Divide Drum Track
1
2
CAUTION