Yamaha MOTIF XS7 EN - Manual (Page 285)

V
oice mode
Song mode
P
attern mode
Mixing mode
Master mode
Utility mode
File mode
P
erf
ormance mode
Sampling
mode 1
Sampling
mode 2
Ref
erence
File Management (File mode)
MOTIF XS Owner’s Manual 285
This method is available only when entering the File mode
from the Song mode or Pattern mode.
1
Select a device and directory as source by
following “Basic Procedure in the File mode”
on page 276.
2
Set the Type to “SMF.”
Only available files according to the Type are listed in
the Directory/File list box on the display.
3
Specify the destination memory location in the
User memory.
Select a Song number or Pattern Number/Section to
which the Standard MIDI File is to be loaded.
n When you want to load the SMF file to a Song, enter the
File mode from the Song mode. When you want to load the
SMF file to a Pattern, enter the File mode from the Pattern
mode.
4
Select the file to be loaded.
You can select any of the files listed in the Directory/File
list box on the display.
5
Press the [SF2] button (a prompt for
confirmation appears).
Press the [DEC/NO] button to cancel the Load
operation.
6
Press the [INC/YES] button to execute the
Load operation.
The Load operation overwrites any data previously existing in
the destination internal memory. Important data should always
be saved to a USB storage device connected to the USB TO
DEVICE terminal or to a computer connected to the same
network as the MOTIF XS (page 278).
Loading a SMF file (Standard MIDI file)
CAUTION