Yamaha MOTIF XS7 EN - Manual (Page 151)

MOTIF XS Owner’s Manual
Editing a Performance
151
V
oice mode
Song mode
P
attern mode
Mixing mode
Master mode
Utility mode
File mode
P
erf
ormance mode
Sampling
mode 1
Sampling
mode 2
Ref
erence
Part Edit parameters
[PERFORM]
➞ Performance selection ➞ [EDIT] ➞ Part selection
In the Performance Part Edit mode, you can edit the parameters of the individual Parts such as Voice, Arpeggio, EG and EQ
settings.
About the asterisk (*) marks
For users who are new to editing and may be confused by the large amount of parameters, the most basic and easy-to-understand
parameters are conveniently marked with asterisks in this section. If you are just starting out with editing Performance Parts, try these
parameters first.
In the Performance Part Edit mode, you can use two types
of display. One type of display lets you edit parameters for
the currently selected Part and the other type of display
lets you view parameters for four Parts. You can switch
between these two types by pressing the [SF5] button.
Note that the display for four Parts is not available for the
[F2] ARP Main and the [F3] ARP Other displays.
After pressing the [PERFORMANCE CONTROL] or
[TRACK] button so that its lamp lights, press one of the [1]
– [4] buttons to select a Part to be edited.
n For details about useful functions such as Mute/Solo and Jobs,
see pages 142 and 159.
Setting the Wave and Note range of
the Part—[F1] Voice
1 Part Switch*
Determines whether the currently edited Part is on or off.
When this is set to off, the currently edited Element will not
sound.
Settings: off (inactive), on (active)
2 Bank*
3 Number*
Determines the Voice assigned to the current Part by
specifying the Voice Bank and Number.
n You can call up the list and select the desired item by pressing
the [SF6] LIST button. For details, see page 82.
4 Param. with Voice (Parameter with Voice)
Determines whether or not the following parameter settings
of the selected Voice are copied from the Voice to the
current Part when you change a Voice for the current Part
individually.
• Arpeggio settings
• Filter Cutoff Frequency
• Filter Resonance
• Amplitude EG
• Filter EG
• Pitch Bend Range (Upper/Lower)
• Note Shift
n Regardless of the Parameter with Voice setting (4), the
settings of Mono/Poly ( )), Portamento Part Switch (!),
Portamento Time ( @) and Portamento Mode (#) are not
Selected Part display/Four-Part display
Selecting a Part to be edited
5
SF5
The display for the currently selected Part
The display for all four Parts of the current Performance
PART SELECT ARP ON/OFF
1 2 3 4 5 6 8 7 COMMON EDIT
Selecting a Part
Voice Settings for each Part—[SF1] Voice
1
2
3
4
)
!
@
$ #
%
5
6
7
9
8