Yamaha MOTIF XS7 EN - Manual (Page 179)

Song Playback
MOTIF XS Owner’s Manual 179
V
oice mode
Song mode
P
attern mode
Mixing mode
Master mode
Utility mode
File mode
P
erf
ormance mode
Sampling
mode 1
Sampling
mode 2
Ref
erence
Fast Forward/Rewind
1
Move the cursor to Measure.
2
Move forward or backward through the
measures by using the [INC/YES], [DEC/NO]
buttons and the data dial.
Moving to a desired location in the Song
1
Move the cursor to Measure.
2
Press the [SF6] NUM button so that the [SF1] –
[SF5] and [F1] – [F6] buttons function as
number buttons.
3
Enter the destination measure by using the
[SF1] – [SF5] and [F1] – [F5] buttons.
The measure number you input will appear at the top of
the display.
4
Press the [ENTER] button to actually move the
Song playback position to the destination set
above.
To mute a track
1
Press the [MUTE] button so that its indicator
lights.
2
Press any of the Number buttons [1] to [16]
corresponding to the track you want to mute.
When pressing any of the Number buttons [1] – [16],
the lamp of the pressed button will be turned off and
the corresponding track will be muted. Pressing the
same Number button again enables output of the
playback sound.
To solo a track
1
Press the [SOLO] button so that its indicator
lights.
2
Press any of the Number buttons [1] to [16]
corresponding to the track you want to solo.
When pressing any of the Number buttons [1] – [16],
the lamp of the pressed button will flash and only the
corresponding track will be sounded. Pressing the
different Number button changes the soloed track.
1
Move the cursor to Tempo.
2
Edit the Tempo value by using the [INC/YES],
[DEC/NO] buttons and the data dial.
You can assign five different “snapshots” of important
Song-related parameters such as transpose, tempo, track
mute status, and the basic Song Mixing setup to the [SF1]
– [SF5] buttons as Song Scenes. One of the convenient
advantages of Song Scene is that it lets you instantly and
automatically execute parameter settings that normally
require many button presses or controller operations. Use it
during Song recording or playback to make instantaneous
setting changes.
Song Scene parameters
Track mute/solo
1 2 3 4 5
6 7 8 9 0 -
F1 F2 F3 F4 F5 F6
SF1 SF2 SF3 SF4 SF5 SF6
The [SF1] – [SF5] and [F1] – [F6] buttons function as number buttons.
Shows the measure number to be entered.
PART SELECT ARP ON/OFF
PART MUTE ARP HOLD
PERFORMANCE
CONTROL
1 2 3 4 5 6 8 7
9 10 11 12 13 14 15 16
TRACK
MUTE SOLO
1
2
Change the tempo
Assigning various settings related to
Song playback (Song Scene)
Tempo Song
mode Track View display
(page 181)
Transpose
Play Effect settings for 16 tracks Play FX display
(page 183)
Volume settings for 16 Mixing Parts Mixing
mode Part 1-16 display
(page 231)
Pan settings for 16 Mixing Parts
Reverb Send settings for 16 Mixing Parts
Chorus Send settings for 16 Mixing Parts
Cutoff Frequency settings for 16 Mixing
Parts EG display
(page 235)
Resonance settings for 16 Mixing Parts
AEG Attack settings for 16 Mixing Parts
AEG Release settings for 16 Mixing Parts
PART SELECT ARP ON/OFF
PART MUTE ARP HOLD
PERFORMANCE
CONTROL
1 2 3 4 5 6 8 7
9 10 11 12 13 14 15 16
TRACK
MUTE SOLO
1
2
Tempo