Yamaha MOTIF XS7 EN - Manual (Page 70)

Basic Structure
MOTIF XS Owner’s Manual 70
Basic Structure
Basic Operation
Connections
Basic Section
1 Sets the Part EQ parameters applied to each
part in the EQ display (page 144) of
Performance Part Edit.
2 Determines the Send Level/Return Level to/
from the Reverb/Chorus and the signal level
sent from the Chorus to the Reverb.
This block also selects the Effect Types of Reverb and
Chorus respectively and sets the related parameters.
These can be set in the Connect display (page 149)
and the Reverb display/Chorus display (page 150) of
Performance Common Edit.
3 Selects the Master Effect type and sets the
Effect parameters in the Master Effect display
(page 146) of Performance Common Edit.
4 Sets the Master EQ parameters in the Master
EQ display (page 146) of Performance
Common Edit.
n The Effect settings of 1 – 3 in the Voice mode illustrated on
page 69 are available also in the Performance mode.
1 Sets the Part EQ parameters applied to each
part in the EQ display (page 236) of Mixing Part
Edit.
2 Selects the eight Parts to which the Insertion
Effect is applied from Parts 1 – 16 and the AD
Part.
This can be set in the Insertion Effect Switch display
(page 234) of the Mixing Edit.
3 Determines the Send Level/Return Level to/
from the Reverb/Chorus and the signal level
sent from the Chorus to the Reverb.
This block also selects the Effect Types of Reverb and
Chorus respectively and sets the related parameters.
These can be set in the Connect display (page 234)
and the Reverb display/Chorus display (page 235) of
Mixing Common Edit.
4 Selects the Master Effect type and sets the
Effect parameters in the Master Effect display
(page 234) of Mixing Common Edit.
5 Sets the Master EQ parameters in the Master
EQ display (page 234) of Mixing Common Edit.
n The Effect settings of 1 – 3 in the Voice mode illustrated on
page 69 are available for up to eight parts for which the
Insertion Effect is turned on.
Effect Category and Type
This section explains the Effect categories and their types.
The Effect Type list described below for each category
contains the columns: Rev (Reverb), Cho (Chorus), Ins
(Insertion) and Mas (Master Effect). The checkmarks
indicated in these columns means the Effect Type is
available for each block. These Effect types (with the
checkmarks indicated in each list) can be selected from
the panel controls.
Reverb
Also called “reverberation,” this refers to the sound energy
remaining in a room or closed space after the original
sound stops. Similar to yet different from echo, reverb is the
indirect, diffuse sound of reflections from the walls and
ceiling that accompany the direct sound. The
characteristics of this indirect sound depends on the size
of the room or space and the materials and furnishings in
the room. Reverb Effect types use digital signal processing
to simulate these characteristics.
Mixing mode
1
2
3
4 5 Mixing
Part
Part EQ
Part 1 – 16
AD Part
Voice
Insertion A/B
Send
Level Return
Level
Reverb
Chorus To
Reverb
Chorus
Master Effect Master EQ
Effect Type Rev Cho Ins Description
REV-X HALL ✔ – – Reverb emulating the
acoustics of a concert hall
using the REV-X technology.
R3 HALL ✔ – – Reverb emulating the
acoustics of a concert hall
using the algorithm derived
from the Yamaha ProR3.