Yamaha MOTIF XS7 EN - Manual (Page 270)

V
oice mode
Song mode
P
attern mode
Mixing mode
Master mode
Utility mode
File mode
P
erf
ormance
mode
Sampling
mode 1
Sampling
mode 2
Ref
erence
System Settings (Utility mode, etc.)
MOTIF XS Owner’s Manual 270
From this display you can set the parameters related to the
click sound (metronome) that is used during recording or
playback in the Song/Pattern/Performance mode.
n Since the click sound is created with the internal tone
generator, using click playback affects the overall polyphony
of this synthesizer.
1 Mode
Determines whether and when the metronome click will
sound.
Settings: off, rec, rec/play, always
off
The click will not sound.
rec
The click will sound during Song/Pattern/Performance recording only.
rec/play
The click will sound during recording and playback.
always
The click will always sound in the Song/Pattern mode.
2 Beat
Determines on which beats the metronome click will sound.
Settings: a (16th notes), e (8th notes), q (quarter notes), (half
notes), w (whole notes)
3 Volume
Determines the click sound volume.
Settings: 0 – 127
4 Type
Determines the click sound type. Ten types are available,
including conventional metronome and stick sounds.
Settings: 1 – 10
5 Recording Count
Determines the number of count-in measures provided
before recording actually starts after pressing the [
F]
(Play) button in the Record standby mode.
Settings: off (Recording starts as soon as the [ F] button is pressed),
1 meas – 8 meas
From this display you can set which MIDI events will be
recognized/transmitted via MIDI. The settings made here
apply only to Song/Pattern playback data; they do not
affect the MIDI events generated by your keyboard playing
or panel operations and Arpeggio playback in the Voice
and Performance modes. The Song/Pattern playback data
will pass through the MIDI Filter before being sent to the
internal tone generator block as well as the MIDI OUT
connector.
MIDI messages transmitted from the external MIDI
instrument will pass through the MIDI Filter before being
recorded to the Song/Pattern track. They will be sent to the
internal tone generator without passing through the MIDI
Filter.
MIDI events to which the Filter is applied:
Note, Program Change, Control Change, Pitch Bend,
Channel After Touch, Polyphonic After Touch, System
Exclusive, Channel Mode Message
Settings: B (not transmitted/recognized), A (transmitted/recognized)
From this display, you can instantly call up appropriate
sequencer-related panel settings by selecting convenient
preset setups, allowing you to simultaneously set a variety
of important sequencer-related parameters.
n The Track INT Switch and Track EXT Switch parameters are
not available when calling up the Quick Setup window from the
Performance mode.
Metronome Settings—[F1] Click
1
2
3
4
5
MIDI Filter Settings—[F2] MIDI Filter
Using the Quick Setup function—[F3]
Quick (Quick Setup)
MIDI IN MIDI OUT
Sequencer Block
Tone Generator Block
Keyboard/Controllers
MIDI Filter
1
2 3