Exchange track 03: mix track 04: clear track, Normalize play effect 06: divide drum track – Yamaha MOTIF XS7 EN User Manual

Page 205

Advertising
background image

Song Job

MOTIF XS Owner’s Manual

205

V

oice mode

Song mode

P

attern mode

Mixing mode

Master mode

Utility mode

File mode

P

erf

ormance

mode

Sampling

mode 1

Sampling

mode 2

Ref

erence

This Job exchanges or “swaps” the specified type of data
between two specified tracks in the current Song.

1 Track

Determines the tracks (01 – 16) to which the Job is applied.

2 Data Type

Determines the type(s) of data to be exchanged. Select the
desired type by checkmarking the appropriate box.

Settings: Sequencer Event (all events in the track), Play Effect, Mix

Part Parameters

This job mixes all data from two selected tracks (

1 and

2), and places the result in track 2. Keep in mind that
applying this Job to tracks with Sample Voices does not
mix the Sample Voices. The Sample Voice itself will not be
mixed.

This Job deletes all data of the selected type from the
selected track.

1 Track

Determines the Song track (01 – 16, tempo, scene, all) to
which the Job is applied.

2 Data type to be cleared

Determines the type(s) of data to be cleared. Select the
desired type by checkmarking the appropriate box.

Settings: Sequencer Event (all events in the track), Play Effect, Mix

Part Parameter (all Mixing Part parameters), Sample Voice

Undo/Redo cannot be used to undo/redo a Clear operation for

tracks that contain sample data.

n The Waveform on DIMM cannot be deleted via this Job even if

the Sample Voice box is checked. If you want to actually
delete the Waveform, use the Delete Job (page 177) in the
Sampling Job mode.

This job rewrites the data in the selected track so that it
incorporates the current Play Effect settings.

1 Track

Determines the Song track (01 – 16, all) to which the Job is
applied.

This Job separates the note events in a drum performance
assigned to a specified track, and places the notes
corresponding to different drum instruments in separate
tracks (tracks 1 through 8). The division table below is
designed assuming the GM Drum Voice is used. If you
want to apply this Job to the sequence data using a Drum
Voice other than a GM Voice, you should confirm the
arrangement of the drum/percussion instruments for each
Drum Voice by using the separate Data List booklet.

02: Exchange Track

03: Mix Track

04: Clear Track

1

1

2

1

2

2

1

2

05: Normalize Play Effect

06: Divide Drum Track

CAUTION

1

1

Advertising
This manual is related to the following products: