Zebra Technologies Zebra S Series 105SL - Manual (Page 11)

11342L Rev. 8 6/4/2004 105SL User Guide vii
Warranty Information
Effective December 30, 2002
All new Zebra products are warranted by the manufacturer to be free from defect in material and
workmanship.
Printers and Related Hardware Products
Proof of purchase or shipment date is required to validate the warranty period. The warranty
becomes void if the equipment is modified, improperly installed or used, damaged by accident or
neglect, or if any parts are improperly installed or replaced by the user.
Products returned must be packaged in the original or comparable packing and shipping container.
In the event equipment is not so packaged, or if shipping damage is evident, it will not be accepted
for service under warranty. Surface transportation charges for return to customers in the continental
United States is paid by Zebra. Otherwise, Zebra pays CPT (carriage paid to) nearest airport;
customer pays customs, duties, taxes, and freight from airport to destination. If Zebra determines
that the product returned for warranty service or replacement is not defective as herein defined, the
customer will pay all handling and transportation costs.
Printers
All printers (excluding printheads) are warranted against defect in material or workmanship for
twelve (12) months from the purchase date.
Printheads
Since printhead wear is part of normal operation, the original printhead is covered by a limited
warranty as indicated below. Warranty period begins on purchase date.