Zebra Technologies XiIII Series - Manual (Page 102)

94 Zebra XiIII-Series User’s Guide
Figure 39
RS-232 Interconnections
The printer is configured as Data Terminal Equipment (DTE).
Figure 39 illustrates the internal connections of the printer’s RS-232
connector.
Figure 40 illustrates the connections required to interconnect the printer
with the standard 9-pin serial port connector on a computer.
NOTE: If using a 9-pin to 25-pin adapter plug attached to the computer,
use a null modem cable between the adapter plug and the printer.
To connect the printer to other DTE devices with DB-25
connectors (such as the serial port of a PC), an RS-232 null
modem (crossover) cable should be used.