Printing a test label, 3ulqwlqj d 7hvw /deho – Zebra Technologies XiIII Series User Manual
Page 27
Advertising
Zebra XiIII-Series User’s Guide
19
3ULQWLQJ D 7HVW /DEHO
To print a test label:
1. Turn off the printer.
2. Press and hold the CANCEL key
while turning on the printer.
A configuration label prints showing the
printer’s currently stored parameters
(similar to the one shown in Figure 12).
Figure 12
If you encounter any problems while you are configuring or calibrating the
printer or printing a test label, refer to Troubleshooting, which starts on
page 75. Otherwise, refer to Establishing Communication on page 21 to
set up the communication parameters.
Advertising