Zebra Technologies XiIII Series - Manual (Page 99)

Zebra XiIII-Series User’s Guide 91
0HGLD 6SHFLILFDWLRQV
*
Media registration and minimum label length are affected by media type and width, ribbon type, print speed, and printer mode of operation.
Performance improves as these factors are optimized. Zebra recommends always qualifying any application with thorough testing.
Media Specifications 90/96XiIII 140XiIII 170XiIII 220XiIII
Minimum label length*
Tear-off 0.7" (18 mm) 0.7" (18 mm) 0.7" (18 mm) 0.7" (18 mm)
Peel-off 0.5" (13 mm) 0.5" (13 mm) 0.5" (13 mm) 0.5" (13 mm)
Cutter 1.5" (38 mm) 1.5" (38 mm) 1.5" (38 mm) 1.5" (38 mm)
Rewind 0.25" (6 mm) 0.25" (6 mm) 0.25" (6 mm) 0.25" (6 mm)
Total media width (label + liner, if any)
Minimum 0.79" (20 mm) 1.57" (40 mm) 2.00" (51 mm) 4.25" (108 mm)
Maximum 3.54 mm
(90 mm)
5.51 mm
(140 mm)
7.1 mm
(180 mm)
8.80 mm
(224 mm)
Total thickness (includes liner, if any)
Minimum 0.003"
(0.076 mm)
0.003"
(0.076 mm)
0.003"
(0.076 mm)
0.003"
(0.076 mm)
Maximum 0.012"
(0.305 mm)
0.012"
(0.305 mm)
0.012"
(0.305 mm)
0.012"
(0.305 mm)
Cutter maximum full-width media thickness 0.014" (0.35 mm) 0.009" (0.23 mm) 0.007" (0.18 mm) 0.005" (0.14 mm)
Roll media core inside diameter 3" (76 mm) 3" (76 mm) 3" (76 mm) 3" (76 mm)
Maximum roll diameter 8.0" (203 mm) 8.0" (203 mm) 8.0" (203 mm) 8.0" (203 mm)
Inter-label gap
Minimum 0.079" (2 mm) 0.079" (2 mm) 0.079" (2 mm) 0.079" (2 mm)
Preferred 0.118" (3 mm) 0.118" (3 mm) 0.118" (3 mm) 0.118" (3 mm)
Maximum Maximum inter-label gap =
2 x (label length for which you have calibrated the printer) + 1"
Maximum internal fanfold media pack size (label + liner)
L x W x H 8.0" x 4.5 " x 4.5"
(203 mm x
114 mm x
114 mm)
8.0"x 5.5" x 4.5"
(203 mm x
140 mm x
114 mm)
8.0" x 7.1" x 4.5"
(203 mm x
180 mm x
114 mm)
8.0" x 8.8" x 4.5"
(203 mm x
224 mm x
114 mm)
Ticket/tag sensing notch L x W 0.12" x 0.25"
(3 mm) x (6 mm)
0.12" x 0 .25"
(3 mm) x (6 mm)
0.12" x 0.25"
(3 mm) x (6 mm)
0.12" x 0.25"
(3 mm) x 6 mm)
Ticket/tag sensing hole diameter 0.125" (3 mm) 0.125" (3 mm) 0.125" (3 mm) 0.125" (3 mm)
Effective leading edge registration
accuracy*
Vertical ± 0.060"
(±1.5 mm)
± 0.070"
(±1.8 mm)
± 0.060"
(±1.5 mm)
± 0.050”"
(±1.3 mm)
Horizontal ± 0.060"
(±1.5 mm)
± 0.070"
(±1.8 mm)
± 0.060"
(±1.5 mm)
± 0.060"
(±1.5 mm)
Additional
specifications for
black mark sensing
Mark length
(measuring parallel
to label/tag edge) Minimum 0.12" (3 mm) 0.12" (3 mm) 0.12" (3 mm) 0.12" (3 mm)
Maximum 0.43" (11 mm) 0.43" (11 mm) 0.43" (11 mm) 0.43" (11 mm)
Mark width
(measuring to
perpendicular label/
tag edge) Minimum 0.43" (11 mm) 0.43" (11 mm) 0.43" (11 mm) 0.43" (11 mm)
Maximum Full media width Full media width Full media width Full media width
Mark location Marks must be located within 0.040" (1 mm) of the inside media edge.
Mark density >1.0 Optical
Density Unit
(ODU)
>1.0 Optical
Density Unit
(ODU)
>1.0 Optical
Density Unit
(ODU)
>1.0 Optical
Density Unit
(ODU)
Maximum density of the back of the
media on which the black mark is
printed 0.5 ODU 0.5 ODU 0.5 ODU 0.5 ODU