Zebra Technologies XiIII Series - Manual (Page 73)

Zebra XiIII-Series User’s Guide 65
4. Rotate the platen roller and clean thoroughly with solvent and an
applicator.
5. Brush/vacuum any accumulated paper lint and dust away from the
rollers.
6. Reload ribbon and/or media, and close the printhead.
NOTE: If print quality has not improved after performing this procedure,
try cleaning the printhead with Save-a-Printhead cleaning film.
This specially-coated material removes contamination buildup
without damaging the printhead. Call your authorized Zebra
reseller/distributor for more information.
Figure 27