P. 9, Step 3: turn on the power and start playback – Yamaha RX-V1900BL User Manual
Page 13
Quick start guide
9
En
INTR
ODUCTION
English
1
Turn on the video monitor connected to this
unit.
2
Press A
MASTER ON/OFF inward to the ON
position on the front panel.
3
Rotate the C
INPUT selector to set the input
source to “DVD”.
4
Start playback of the desired DVD on your
player.
5
Rotate Q
VOLUME to adjust the volume.
6
To set this unit to the standby mode, press
B
MAIN ZONE ON/OFF.
y
For details about turning on/off this unit and the standby
mode, see page 26.
■ For other operations
• Optimizing the speaker parameters
automatically
• Basic playback operations
• Sound field programs
• Pure high-fidelity sounds
• FM/AM radio tuning
• XM Satellite Radio tuning
• SIRIUS Satellite Radio tuning
• iPod playback
• Bluetooth component playback
Step 3: Turn on the power and start
playback
Check the type of the connected speakers.
If the speakers are 6-ohm speakers, set “SPEAKER
IMP.” to “6
Ω MIN” before using this unit (page 26).
You can also use 4-ohm speakers as the front speakers
(page 102).