Yamaha RX-V1900BL - Manual (Page 78)

74
En
The “MANUAL SETUP” menu allows you to manually adjust speaker and system parameters using the remote control.
For the complete menu structure, see “SET MENU tree” (page 123).
y
The initial factory settings are indicated in bold under each parameter.
This section explains how to configure parameters in the
MANUAL SETUP menu using the OSD.
y
• To return to the previous menu level, press 9RETURN.
• Pressing JPARAMETER cancels the menu operation.
1
Set the operation mode selector to E
AMP
and then press H
MENU to enter “SET
MENU”.
The top “SET MENU” screen appears in the OSD.
2
Press 8k / n to select “MANUAL SETUP”
and then press 8
ENTER.
The “MANUAL SETUP” screen appears in the OSD.
3
Press 8 k / n repeatedly and then press
8
ENTER to select and enter the desired
menu.
As an example, the following screen appears if
“SOUND MENU” is selected.
4
Press 8 k / n repeatedly and then press
8
ENTER to select and enter the desired
submenu.
As an example, the following screen appears if “LFE
LEVEL” is selected.
5
Press 8 k / n to select the desired parameter
and then 8 l / h to change the parameter
settings.
• To increase the value, press 8 h.
• To decrease the value, press 8 l.
6
Press H
MENU to exit from “SET MENU”.
Customizing this unit (MANUAL SETUP)
Operating the MANUAL SETUP
menu
[ ]/[ ]:
[ENTER]:
[ p
SET MENU
;AUTO SETUP
;MANUAL SETUP
;SYSTEM MEMORY
;SIGNAL INFO
Up/Down
Enter
.
[ ]/[ ]:
[ENTER]:
[ p
MANUAL SETUP
1 SPEAKER MENU
2 VOLUME MENU
3 SOUND MENU
4 VIDEO MENU
5 INPUT MENU
6 OPTION MENU
Up/Down
Enter
.
[ ]/[ ]:
[ENTER]:
[ p
3 SOUND MENU
A)EQUALIZER
B)LFE LEVEL
C)DYNAMIC RANGE
D)LIPSYNC
E)AUDIO SET
F)PURE DIRECT
Up/Down
Enter
.
[ ]/[ ]:
[
p]/[[]:
[ p
B)LFE LEVEL
SPEAKER;;;;;;0dB
HEADPHONE;;-20dB
Up/Down
Adjust
.