Yamaha RX-V1900BL - Manual (Page 95)

91
En
Remote control features
AD
V
ANCED
OPERA
T
ION
English
■ Selecting a component to be controlled
You can select a component to be controlled
independently of the input source selected with the input
selector buttons (3).
Press 5
SELECT l / h repeatedly to select the
desired component.
The name of the component to be controlled appears in the
display window (4) on the remote control.
■ Controlling optional components
(Option mode)
“OPTN1” and “OPTN2” are optional component control
areas that can be programmed with remote control
functions independently from any input source. These
areas are useful for programming commands that are to be
used only as a part of a macro function or for components
that do not have a valid remote control code.
To select the option mode, press 5
SELECT l /
h repeatedly until “OPTN1” or “OPTN2” appears
in the display window (4) on the remote control.
You cannot set a remote control code for the optional areas. See
page 93 to program buttons operated within this component
control area.
You can control other components by setting the
appropriate remote control codes. Codes can be set up for
each input area. For a complete list of available remote
control codes, refer to “List of remote control codes” at
the end of this manual.
The following table shows the default component
(Library: component category) and the remote control
code for each control area.
Remote control code default settings
You may not be able to operate your Yamaha component even if
a Yamaha remote control code is preset as listed above.
In this case, try setting another Yamaha remote control code.
1
Check the remote control code for your
component in advance.
For a complete list of available remote control codes,
see “List of remote control codes” at the end of this
manual.
2
Set the operation mode selector on the
remote control to E
SOURCE.
If you want to set the remote control code for “TV”,
set the operation mode selector to ETV.
Note
DVD
or OPTN1 OPTN2
Setting remote control codes
Control
area
Library
(component
category)
Manufacturer
Default
code
MULTI DVD Yamaha 04306
V-AUX — — —
PHONO — — —
DOCK SOURCE Yamaha 00012
BD
HD DVD
BD Yamaha 04706
DVD DVD Yamaha 04306
CD CD Yamaha 01205
MD
CD-R
CD-R Yamaha 01405
CBL
SAT
— — —
TV — — —
DVR DVR Yamaha 00707
VCR — — —
TUNER SOURCE Yamaha 00012
XM SOURCE Yamaha 00012
SIRIUS SOURCE Yamaha 00012
— — —
Note
A