2 volume menu, Test tone – Yamaha RX-V1900BL User Manual

Page 81

Advertising
background image

77

En

Customizing this unit (MANUAL SETUP)

AD

V

ANCED

OPERA

T

ION

English

Speaker distances
Control range: 0.30 to 24.00 m (1.0 to 80.0 ft)
Control step: 0.10 m (0.5 ft)
Initial setting:
FRONT L/FRONT R/SWFR/PRNS L/PRNS R: 3.00 m
(10.0 ft)
CENTER: 2.60 m (8.5 ft)
SUR. L/SUR. R/SB L/SB R: 2.40 m (8.0 ft)

• The available speaker channels differ depending on the

“CONFIG” setting.

• Instead of “SB L” and “SB R”, “SUR.B” is displayed if

“SUR.B L/R SP” is set to either “SMLx1” or “LRGx1”.

Test tone

D)TEST TONE

Turns the test tone output on or off for the “CONFIG”,
“LEVEL” and “DISTANCE” settings.

y

If you use a handheld sound pressure level meter, hold at arm’s
length and point upwards so that the meter is in the listening
position. With the meter set to the 70 dB scale and to C SLOW,
calibrate each speaker to 75 dB.

This function is automatically turned off if you exit from
“SPEAKER MENU”.

Use this menu to manually adjust the various volume
settings.

Adaptive dynamic range control
ADAPTIVE DRC
Use this feature to adjust the dynamic range in
conjunction with the volume level. This feature is useful
when you are listening at lower volumes or at night. When
“ADAPTIVE DRC” is set to “AUTO”, this unit controls
the dynamic range as follows:

– If the VOLUME setting is low:

the dynamic range is narrow

– If the VOLUME setting is high:

the dynamic range is wide

y

• You can also adjust the dynamic range of the bitstream signal

sources by using “DYNAMIC RANGE” in “SOUND MENU”
(page 79).

• This function is also useful for listening with your headphones.

The adaptive dynamic range control feature does not function
when this unit is in the Pure Direct mode (page 46).

Adaptive DSP level

ADAPTIVE DSP LEVEL

Use this feature to make fine adjustments of the DSP
effect level (page 68) automatically in conjunction with
the volume level.

Even if you set “ADAPTIVE DSP LEVEL” to “AUTO”, this
unit does not change but the fine-tunes the specified value of
“DSP LEVEL” (page 68).

DISTANCE

Adjusted speaker

FRONT L

Front left speaker

FRONT R

Front right speaker

CENTER

Center speaker

SUR. L

Surround left speaker

SUR. R

Surround right speaker

SB L

Surround back left speaker

SB R

Surround back right speaker

SWFR

Subwoofer

PRNS L

Presence left speaker

PRNS R

Presence right speaker

Notes

Choice

Functions

OFF

This unit does not output the test tone for the
“CONFIG”, “LEVEL” and “DISTANCE”
settings.

ON

This unit outputs the test tone for the
“CONFIG”, “LEVEL” and “DISTANCE”
settings.

Note

2 VOLUME MENU

Choice

Functions

AUTO

Adjusts the dynamic range automatically.

OFF

Does not adjust the dynamic range automatically.

Note

Choice

Functions

AUTO

Adjusts the DSP effect level in conjunction with
the volume level.

OFF

Does not adjust the DSP effect level
automatically.

Note

Input level

Output le

v

el

Output le

v

el

Input level

AUTO

OFF

AUTO

OFF

VOLUME: low

VOLUME: high

Advertising