Yamaha RX-V1900BL - Manual (Page 79)

75
En
Customizing this unit (MANUAL SETUP)
AD
V
ANCED
OPERA
T
ION
English
Use this feature to manually adjust the basic speaker
settings. Most of the “SPEAKER MENU” parameters are
set automatically when you run the automatic setup.
y
• Set “TEST TONE” to “ON” (page 77) to output the test tone for
the “CONFIG”, “LEVEL” and “DISTANCE” settings.
• If your subwoofer can adjust the output volume and the
crossover frequency, set the volume to about half way (or
slightly less) and set the crossover frequency to the maximum.
■ Speaker configurations A)CONFIG
LFE/bass out LFE/BASS OUT
Use this feature to select the speakers that output the LFE
(low-frequency effect) and the low-frequency signals.
LFE signals output
Low-frequency signals output
*1 Output(s) the low-frequency signals of the front
channels and other speakers set to “SMALL”.
*2 Always output the low-frequency signals of the front
channels.
*3 Output the low-frequency signals if the speakers are set
to “LARGE”.
*4 Outputs the low-frequency signals of the speakers set to
“SMALL”.
Front speakers FRONT SP
When “LFE/BASS OUT” is set to “FRONT”, you can select
only “LARGE” in “FRONT SP”. If the value of “FRONT SP” is
set to other than “LARGE” in advance, this unit change the
value to “LARGE” automatically.
Center speaker CENTER SP
Surround left/right speakers SUR. L/R SP
1 SPEAKER MENU
Choice
Subwoofer(s) and speakers
Subwoofer(s)
Front
speakers
Other
speakers
BOTH Output No output No output
SWFR Output No output No output
FRONT No output Output No output
Choice
Subwoofer(s) and speakers
Subwoofer(s)
Front
speakers
Other
speakers
BOTH *1 *2 *3
SWFR *4 *3 *3
FRONT No output *1 *3
Measure for the speaker size
The woofer section of a speaker is
– 16 cm (6.5 in) or larger: large
– smaller than 16 cm (6.5 in): small
Choice Descriptions
LARGE Select this setting when the front speakers are
large.
SMALL Select this setting when the front speakers are
small.
Note
Choice Descriptions
LARGE Select this setting when the center speaker is
large.
SMALL Select this setting when the center speaker is
small.
NONE Select this setting when you do not use the center
speaker. The center channel signals are directed
to the front left and right speakers.
Choice Descriptions
LARGE Select this setting when the surround speakers
are large.
SMALL Select this setting when the surround speakers
are small.
NONE Select this setting when you do not use the
surround speakers. This unit is set to the Virtual
CINEMA DSP mode (page 44), and “SUR.B L/
R SP” is automatically set to “NONE”.