Yamaha RX-V1900BL - Manual (Page 90)

86
En
Use this feature to save up to six of your favorite settings
that can be easily recalled when needed. You can save the
following system setting parameters:
* The settings of “DYNAMIC RANGE”, “LFE LEVEL”, and
the tonal quality control for headphones are not saved.
■ Saving by the 6SYSTEM MEMORY
buttons
You can save the system settings stored in “MEMORY1”
to “MEMORY4” by pressing the corresponding
6SYSTEM MEMORY buttons.
Press and hold one of the 6
SYSTEM MEMORY
buttons on the remote control for 4 seconds.
“MEMORY 1 SAVE Done” (example) appears in the front
panel display, and then this unit saves the current system
setting to the corresponding memory number.
y
If system settings are already stored in the selected memory
number, this unit overwrites the old settings.
■ Saving by the SET MENU operation
You can save the system settings stored in “MEMORY1”
to “MEMORY6” by using the “SYSTEM MEMORY”
menu in “SET MENU”.
1
Set the operation mode selector on the
remote control to E
AMP and then press
H MENU.
The top “SET MENU” screen appears in the OSD.
2
Press 8n to select “SYSTEM MEMORY” and
then press 8
ENTER.
The “SYSTEM MEMORY” menu appears.
3
Press 8n to select “SAVE” and then press
8
ENTER.
The current system settings are displayed.
4
Press 8l / h repeatedly to select the
desired memory number (“MEMORY1” to
“MEMORY6”).
The system settings currently stored in the selected
memory number are displayed. If the memory
number is not in use, “EMPTY” appears.
y
• If system settings are already stored in the selected
memory number, this unit overwrites the old settings.
• To load the system settings with the 6SYSTEM
MEMORY button operation, use one of “MEMORY1” to
“MEMORY4”.
5
Press 8
ENTER to save the current system
settings to the selected memory number.
Saving and recalling the system settings (SYSTEM MEMORY)
Saved parameters Page
“SPEAKER MENU” parameters
(except “TEST TONE”)
75
“VOLUME MENU” parameters
(except “INIT. VOL.”)
77
“SOUND MENU” parameters* 78
“VIDEO MENU” parameters 80
“DISPLAY SET” parameters
(except “SHORT MESSAGE”)
83
Sound field program (or “Pure Direct”)
currently selected
39
Sound field parameter settings 67
Tonal quality control settings* 46
Saving the system settings
4 3
SYSTEM MEMORY
2 1
[ p]/[[]:
[ENTER]:
SYSTEM MEMORY
SAVE;;;;;;;CURRENT
Church in Freiburg
ADAPTIVE DRC;;AUTO
EQUALIZER;;;;;;PEQ
PEQ TYPE;;;NATURAL
Select
Return
.
Current system settings
[ p]/[[]:
[ENTER]:
SYSTEM MEMORY
SAVE;;;;;;;MEMORY1
Drama
ADAPTIVE DRC;;AUTO
EQUALIZER;;;;;;GEQ
PEQ TYPE;;;;;;NONE
Select
Save
.
System settings stored in the
selected memory number