Yamaha RX-V1900BL - Manual (Page 60)

56
En
XM® Satellite Radio tuning
Use this feature to display the XM Satellite Radio
information in the front panel display or in the OSD.
y
• You can configure the display settings with “DISPLAY SET”
(page 83).
• You can hold or release the displayed information by pressing
8ENTER. While it is held, the HOLD indicator flashes in the
front panel.
• If a status message or an error message appears in the front
panel display or video monitor, see “XM Satellite Radio”
(page 109).
• The current XM Satellite Radio reception level appears on the
top of the XM Satellite Radio information screen. For the best
reception, adjust the orientation of the antenna of Home Dock
so that “ ” or “ ” is displayed here. “ ” is displayed if
the antenna cannot receive the signals correctly. In this case,
adjust the orientation of the antenna (page 52).
■ Front panel display
Press L
INFO (or set the operation mode
selector to E
AMP and then press BINFO)
repeatedly to toggle between the following XM
Satellite Radio information display modes.
Back to “ CATEGORY INFO”
y
• If the XM Satellite Radio information contains a character that
cannot be recognized by this unit, the character will be
displayed with a space.
• When the antenna of the XM Mini-Tuner Home Dock cannot
receive the signals, “NO SIGNAL” appears in the front panel
display.
■ Video monitor (OSD)
Press J
DISPLAY on the remote control to turn
on or off the information display.
The following information is displayed in the OSD.
[1] Search mode (page 53)
[2] Channel category
[3] Song title
[4] Antenna reception level
[5] Channel number, channel name
[6] Artist name
Before performing the following operations, set the operation
mode selector on the remote control to ESOURCE and then
press 3XM.
Displaying the XM Satellite Radio
information
Notes
CATEGORY INFO
Channel category, channel number, channel name
SONG INFO
Artist name, song title, channel number, channel name
ANTENNA INFO
Antenna reception level, channel number, channel name
DSP PROG. INFO
Sound field program
INPUT INFO
Input source, channel number, channel name
XM ANT:
ALL CH SEARCH
043:XMU
:Rock
:Coldplay
:Speed of sound
[1]
[2]
[4]
[5]
[6]
[3]