Yamaha RX-V1900BL - Manual (Page 40)

36
En
Playback
Use this feature (audio input jack select) to switch the
input jack assigned to an input source when more than one
jacks are assigned to an input source.
1
Rotate the C
INPUT selector (or press one
of the input selector buttons (3)) to select
the desired input source.
2
Press D
AUDIO SELECT (or set the
operation mode to E
AMP and then press
N AUDIO SEL) repeatedly to select the
desired audio input jack select setting.
y
You can configure the default audio input jack select setting
with “AUDIO SELECT” (page 84).
This feature is not available if no digital input jack is assigned
to the selected input source in “I/O ASSIGNMENT” (page 82).
“HDMI” is available only when an HDMI input jack is
assigned.
Use this feature to select the component connected to the
MULTI CH INPUT jacks (page 23) as the input source.
Rotate the C
INPUT selector on the front panel
to select “MULTI CH” (or press 3
MULTI).
y
You can configure the multi channel input settings with
“MULTI CH” (page 81).
Sound field programs cannot be selected when “MULTI CH” is
selected as the input source.
Connect a pair of headphones with a stereo
analog audio cable plug to the PHONES jack on
the front panel.
y
When you select a sound field program, SILENT CINEMA
mode activates automatically (page 44).
• When you connect headphones, no signals are output at the
speaker terminals.
• All digital multi-channel audio signals are mixed down to the
left and right headphone channels.
• When “MULTI CH” is selected as the input source, only the
signals input at the MULTI CH INPUT FRONT jacks are
output.
Selecting audio input jacks
(AUDIO SELECT)
AUTO Automatically selects input signals in the
following order:
(1) HDMI
(2) Digital signals
(3) Analog signals
HDMI Selects only HDMI signals. When HDMI
signals are not input, no sound is output.
COAX/OPT Automatically selects input signals in the
following order:
(1) Digital signals input at the COAXIAL jack.
(2) Digital signals input at the OPTICAL jack.
When no signals are input, no sound is output.
ANALOG Selects only analog signals. If no analog
signals are input, no sound is output.
Note
DOCK V-AUX VCR DVR CBL/SAT DVD BD/HD DVD MD/CD-R TV CD PHONO MULTI CH TUNER XM SIRIUS
A . S E L : A U T O
Selected audio input jack
select setting
Available input sources
Selecting the multi-channel input
component
Note
Using your headphones
Notes
MASTER
PURE DIRECT
VOLUME
MAIN ZONE
INPUT
OFF ON
INFO
ZONE ON/OFF ZONE CONTROLS
MULTI ZONE
MIC OPTIMIZER
EFFECT
PROGRAM
YPAO
ZONE 3
R L OPTICAL
ZONE 2
AUDIO
VIDEO AUX
SILENT CINEMA S VIDEO VIDEO
PHONES
BAND
CATEGORY PRESET/TUNING/CH MONO STEREO/ MODE SEARCH MEMORY
STRAIGHT
CONTROL SELECT AUDIO TONE ENTER
ON/OFF