Yamaha RX-V3800 User Manual
Page 107
103
En
Saving and recalling the system settings (System Memory)
AD
V
ANCED
OPERA
T
ION
English
■ Example 2: Switching the settings for
different room environments
The tonal characteristics of the listening room may vary
depending on the situations of the room (for example,
whether the curtains are open or closed), and the settings
of this unit should be arranged for each situation of the
room. You can switch between the settings of this unit
easily by using NSYSTEM MEMORY buttons.
Saving each setting
1
Close the curtains of the listening room and
then perform the automatic setup.
See page 37 for details of the automatic setup.
2
Press and hold N
SYSTEM MEMORY 1 for
4 seconds.
This unit stores the settings for the current room
situation (i.e. the curtains are closed) to “Memory1”.
3
Open the curtains of the listening room and
the perform the automatic setup.
4
Press and hold N
SYSTEM MEMORY 2 for
4 seconds.
This unit stores the current room situation (i.e. the
curtains are open) to “Memory2”.
■ Example 3: Saving the sound
configurations for specific sources
The desired sound configurations are different for each
input source. For example, if you use the sound field
program “Village Vanguard” for a music source of a live
jazz performance, the parameter settings may differ when
the input source is a vinyl record or an SACD. You can
store the sound settings for each input source.
Saving each setting
y
See page 76 for the sound field program parameter settings.
1
Start playback of the desired live jazz
performance recorded on the SACD.
2
Set the sound field program to “Village
Vanguard” and then adjust the parameters
for the current playback sources.
3
Press and hold N
SYSTEM MEMORY 1 for
4 seconds.
This unit stores the current sound field program
settings to “Memory1”.
4
Change the input source to “PHONO” and
then start playback of the desired live jazz
performance recorded on the vinyl record.
5
Adjust the sound field program parameters
for the current playback source.
6
Press and hold N
SYSTEM MEMORY 2 for
4 seconds.
This unit stores the current sound field program
settings to “Memory2”.
4
5
7
6
8
CLASSICAL LIVE/CLUB ENTERTAIN
MOVIE
SYSTEM MEMORY
3
2
1
SYSTEM MEMORY 1
The settings when the curtains of the
listening room are closed
SYSTEM MEMORY 2
The settings when the curtains of
the listening room are open
4
5
7
6
8
CLASSICAL LIVE/CLUB ENTERTAIN
MOVIE
SYSTEM MEMORY
3
2
1
SYSTEM MEMORY 1
The “Village Vanguard” program configured
for the SACD sources
SYSTEM MEMORY 2
The “Village Vanguard” program configured for
the vinyl record sources