Yamaha RX-V3800 - Manual (Page 90)

86
En
Graphical user interface (GUI) screen
Test Tone
Use this feature to select whether to turn on or off the
test tone output while you are adjusting the tonal
quality of each speaker.
2
Press 4h to access the settings window.
3
Press 4k / n / l / h to select “PARAM” and
then press 4
ENTER to select a parameter
from “Band” (band), “Freq.” (frequency) or
“Q” (Q factor).
y
You can adjust “Gain” (gain) with any parameter.
4
Press 4n to select “EDIT” and press
4
ENTER to access the edit window.
For more information on the parametric equalizer and
each parameter, see page 142.
The parameter selected in “PARAM” is highlighted.
• Press 4l / h to adjust the parameter.
• Press 4k / n to adjust the “Gain”.
• Press 4ENTER to exit the edit window.
y
• When you select “Band” in step 3, you can use this menu
as a graphic equalizer.
• The “Band #1” and “Band #2” can adjust the frequencies
below of 198.4 Hz.
• When you select “Subwoofer” in step 1 and “Band” in
step 3, you can adjust “Band #1” and “Band #2” only.
5
Repeat steps 3 and 4 until you are satisfied
with the results.
y
If you want to reset all “Parametric EQ” parameter settings
for the selected speaker, select “RESET” and press
4ENTER.
6
Select “EXIT” and press 4
ENTER to exit the
settings window.
■ Tone Control (Tone control)
Use this feature to adjust the balance of bass and treble
output to your speakers or headphones.
Tone Control is not effective when:
– PURE DIRECT (see page 51) is selected.
– MULTI CH INPUT is selected as the input source.
Control (Tone control)
y
“Speaker” and “Headphone” adjustments are stored
independently. The adjustments for “Speaker” affects the front
left/right, center, presence left/right speaker channels and
Subwoofer channel.
Bass (Bass control)
Use this feature to adjust low-frequencies output to your
speakers or headphones.
Choices: 125Hz, 350Hz, 500Hz
Control range: – 6.0 dB to +6.0 dB
Initial setting: 0.0 dB
Choice Functions
On Outputs the test tone.
Off Does not output the test tone.
Test Tone
Front L
Front R
Center
PARAM RESET
EDIT EXIT
Band / Gain
Test Tone
Front L
Front R
Center
Band #1
Gain 0.0dB
Freq. 62.5Hz
Q 1.000
Note
Choice Functions
Speaker adjust the bass/treble balance of your speakers.
Headphone adjust the bass/treble balance of your
headphones.
+6
0
-6
Control
Bass
Treble
Auto Bypass
Speaker
Freq : 350Hz
Gain : 0.0dB