Yamaha RX-V3800 - Manual (Page 46)

42
En
Playback
This unit comes with a variety of input jacks. Use this
feature (audio input jack select) to switch the input jack
assigned to an input source when more than one jacks are
assigned to an input source.
y
• We recommend setting the audio input jack select to “AUTO”
in most cases.
• You can adjust the default the audio input jack select of this unit
by using “Audio Select” in “Option” (see page 98).
• You can also set the audio input jack select setting in “Audio
Select” in “Input Select” (see page 82).
1
Rotate the C
INPUT selector (or press one
of the input selector buttons (1)) to select
the desired input source.
2
Press D
AUDIO SELECT (or 0AUDIO
SEL) repeatedly to select the desired Audio
input jack select setting.
This feature is not available when no digital input jack
(OPTICAL, COAXIAL and HDMI) are assigned. Use “I/O
Assignment” in “Input Select” to reassign the respective input
jack (see page 82).
Use this feature to select the component connected to the
MULTI CH INPUT jacks (see page 29) as the input
source.
Rotate the C
INPUT selector on the front panel
to select MULTI CH (or press 1
MULTI CH IN).
y
Use “MULTI CH” menu in “Input Select” to set the parameters
for MULTI CH (see page 83).
Sound field programs and the Compressed Music Enhancer mode
cannot be selected when the component connected to the MULTI
CH INPUT jacks is selected as the input source (see page 45).
Connect a pair of headphones with a stereo
analog audio cable plug to the PHONES jack on
the front panel.
y
When you select a sound field program, SILENT CINEMA mode
activates automatically (see page 50).
• When you connect headphones, no signals are output at the
speaker terminals.
• When the component connected to the MULTI CH INPUT
jacks of this unit is selected as the input source, only the signals
input at the MULTI CH INPUT FRONT jacks are output from
the connected headphones.
• All digital multi-channel audio signals (except DSD signals) are
mixed down to the left and right headphone channels.
Selecting audio input jacks
(AUDIO SELECT)
AUTO Automatically selects input signals in the
following order:
(1) HDMI
(2) Digital signals
(3) Analog signals
HDMI Selects only HDMI signals. When HDMI
signals are not input, no sound is output.
COAX/OPT Automatically selects input signals in the
following order:
(1) Digital signals input at the COAXIAL jack.
(2) Digital signals input at the OPTICAL jack.
When no signals are input, no sound is output.
ANALOG Selects only analog signals. If no analog
signals are input, no sound is output.
Note
CD-R CD PHONO MULTI CH TUNER XM MD/TAPE BD/HD DVD DVD DVR DTV/CBL VCR V-AUX NET/USB
A . S E L : A U T O
Currently selected Audio
input jack select setting
Available input sources
Selecting the MULTI CH INPUT
component
Note
Using your headphones
Notes
MASTER
PURE DIRECT
VOLUME
MAIN ZONE
INPUT
ON OFF
SLEEP
ZONE ON/OFF ZONE CONTROLS
MIC OPTIMIZER
EFFECT
STRAIGHT
CONTROL SELECT AUDIO TONE REC OUT/ ZONE2
PROGRAM
ZONE 3
R L OPTICAL
USB
ZONE 2
AUDIO
VIDEO AUX
SILENT CINEMA S VIDEO VIDEO
PHONES
DISPLAY
MODE TUNING PRESET/TUNING/CH
SEARCH MODE
EDIT
FM/AM PRESET/
TUNING MAN'L/AUTO FM MEMORY
CATEGORY
A/B/C/D/E
MULTI ZONE
YPAO