Yamaha RX-V3800 - Manual (Page 125)

121
En
Using multi-zone configuration
AD
V
ANCED
OPERA
T
ION
English
B VOLUME +/–
Increases or decreases the volume level of Zone 2 or Zone 3.
C MUTE
Mutes the sound of Zone 2 or Zone 3. Press again to
restore the audio output to the previous volume level.
G ZONE 2/ZONE 3 switch
Switches between the operation mode of Zone 2 and that
of Zone 3.
Controlling the tuner function (see page 53)
3 PRESET k / n
Selects one of the 8 preset station numbers (1 to 8) when
the colon (:) is displayed in the front panel display (see
page 55).
4 A/B/C/D/E
Selects one of the preset station groups (A to E) (see
page 55).
Controlling the XM Satellite Radio tuning
function (see page 56)
2 Numeric buttons
(All Channel Search or Category Search mode)
Use 1 to 9 and 0 to enter a channel number directly.
(Preset Search mode)
Use 1 to 8 to enter a preset channel number directly.
y
While holding down 9NUMBER (see page 121), press the
numeric buttons to enter the desired channel numbers directly
when this unit is in the All Channel Search or Category Search
mode.
5 A-E/CAT. l / h
(All Channel Search mode)
Changes the channel category.
(Category Search mode)
Changes the channel category.
(Preset Search mode)
Changes the preset channel group (A to E).
6 PRESET/CH k / n
(All Channel Search mode)
Searches for a channel within all channels. Press and hold
for quick search.
(Category Search mode)
Searches for a channel within the selected category. Press
and hold for quick search.
(Preset Search mode)
Changes the preset channel number (1 to 8).
7 ALL
Selects the All Channel Search mode as the search mode
(see page 58).
9 NUMBER
Press and hold before you press the numeric buttons to
switch the function to entering the three-digit channel
number in the All channel Search mode or Category
Search mode (see page 58).
D DISPLAY
Displays the XM Satellite Radio information such as
channel number, channel name, category, artist name, or
song title displayed in the front panel display or on the
video monitor (see page 60).
E CAT.
Selects the Category Search mode as the search mode (see
page 58).
F PRESET
Selects the Preset Search mode as the search mode (see
page 58).
Select “TUNER” as the input source of the controlling zone
to use the following functions
Select “XM” as the input source of the controlling zone to use
the following functions.