Yamaha RX-V3800 - Manual (Page 84)

80
En
Graphical user interface (GUI) screen
■ Decoder parameter descriptions
■ Initialize (Program parameters initialization)
Use this feature to initialize the parameter of the selected sound field program.
Choices: No, Yes
• Select “Yes” and then press 4ENTER to set the program parameters to the factory default settings.
• Select “No” (or press 4l) to cancel the program parameter initialization.
y
Use “DSP PARAM” of “INITIALIZE” in “ADVANCED SETUP” to initialize the parameters of all sound field programs (see
page 126).
Decoder parameter Features
Panorama
(“PLIIx Music” and “PLII
Music” only)
Pro Logic IIx Music and Pro Logic II Music panorama. Sends stereo signals to the surround speakers as
well as the front speakers for a wraparound effect.
Choices: Off, On
Center Width
(“PLIIx Music” and “PLII
Music” only)
Pro Logic IIx Music and Pro Logic II Music center width. Moves the center channel output completely
towards the center speaker or towards the front left and right speakers. A larger value moves the center
channel output towards the front left and right speakers.
Control range: 0 (center channel sound is output only from the center speaker) to
7 (center channel sound is output only from the front left and right speakers)
Initial setting: 3
Dimension
(“PLIIx Music” and “PLII
Music” only)
Pro Logic IIx Music and Pro Logic II Music dimension. Adjusts the sound field either towards the front
or towards the rear.
Control range: –3 (towards the rear) to +3 (towards the front)
Initial setting: STD (standard)
Center Image
(“Neo:6 Music” only)
DTS Neo:6 Music center image. Adjusts the front left and right channel output relative to the center
channel to make the center channel more or less dominant as necessary.
Control range: 0.0 (center channel sound is output only from the front left and right speakers) to
1.0 (center channel sound output only from the center speaker)
Initial setting: 0.3
EXTD Surround
(U.S.A. and Canada models
only)
Extended surround mode. Selects the extended surround mode used for the multi-channel sources when
the decoder is selected. See page 88 for details.
Choices: AUTO, PLIIx Movie, PLIIx Music, EX/ES, EX, Neural-THX, OFF
y
You can select “Neural-THX” in “EXTD Surround”. When you select “Neural-THX” in “EXTD
Surround”, this unit plays back Dolby Digital or DTS signals in 6.1/7.1 channels using the Neural-THX
Surround decoder.
SB. Room Size
Dialogue Lift
Initialize No
Yes