Yamaha RX-V3800 - Manual (Page 35)

31
En
Connections
PRE
P
ARA
T
ION
English
To connect this unit to your network, plug one end of a network cable (CAT-5 or higher straight cable) into the
NETWORK port of this unit, and plug the other end into one of the LAN ports on your router that supports the DHCP
(Dynamic Host Configuration Protocol) server function. The following diagram shows a connection example where this
unit is connected to one of the LAN ports on a 4-port router. To enjoy music files saved on your PC and Yamaha MCX-
2000 or access the Internet Radio, each device must be connected properly in the network.
• You must use an STP cable (commercially available) to connect a network hub or router and this unit.
• If the DHCP server function on your router is disabled, you need to configure the network settings manually (see page 94).
• Yamaha MCX-2000, MCX-A10 and MCX-C15 may not be for sale in same locations.
Connecting the network
Notes
NETWORK
LAN
WAN
Router
PC
Modem
Yamaha MCX-2000 Internet
Yamaha MCX-C15
Yamaha MCX-A10
(with optional
speakers)
Network cable