Yamaha RX-V3800 - Manual (Page 85)

81
En
Graphical user interface (GUI) screen
AD
V
ANCED
OPERA
T
ION
English
Use this feature to reassign digital input/outputs, select the
input signal, rename the inputs, or adjust the level of the
signal input at each input source.
• Some parameters described above may not be available for all
input sources and some parameters are only available for
specific input sources.
• When iPod is stationed in a Yamaha iPod universal dock (such
as YDS-10, sold separately) connected to the DOCK terminal
of this unit, “DOCK” appears in the “Input Select” menu
instead of “V-AUX”. In such cases, the parameters marked with
asterisk (*) in the above table do not appear in the input source
parameter menu.
• When you select “NET/USB” as the input source, selected sub
input source (PC/MCX, NET RADIO or USB) appears in the
Input Select menu. You can set “Volume Trim” for each sub
input source separately.
1
Set the operation mode selector to D
AMP
and then press G
SET MENU.
The top display appears.
2
Press 4k / n to select “Input Select” and
then press 4h.
3
Select the desired input source (CD, DVD,
etc.) and then press 4h or 4
ENTER to
access and adjust.
■ Antenna Level (Antenna level)
(U.S.A. and Canada models only)
Use this feature to check the current reception level of the
XM Satellite Radio signals (see page 56). For the best
reception, adjust the orientation of the antenna of
connected Home Dock so that a value of 60% or more is
displayed here.
Display status: None, 0 to 100%
• “None” is displayed if the Home Dock is not connected to this unit.
In this case, check the antenna connections (see page 56).
• The “Antenna Level” parameter cannot be adjusted by using the
remote control. Instead, you need to adjust the orientation of the
antenna of Home Dock connected to the XM jack of this unit
for a better percentage of the reception level.
Input Select
Input source Parameter
XM
(U.S.A. and Canada models
only) Antenna Level
Volume Trim
Rename
TUNER Volume Trim
Rename
MULTI CH Volume Trim
Rename
Multi CH Assign
BGV
PHONO
CD
CD-R
MD/TAPE
BD/HD DVD
DVD
DTV/CBL
DVR
VCR I/O Assignment
Audio Select
Decoder Mode
Volume Trim
Rename
V-AUX or DOCK I/O Assignment*
Audio Select*
Decoder Mode*
Volume Trim
Rename
PC/MCX, NET RADIO or
USB Volume Trim
Notes
Notes
Stereo/Surround
Input Select
Manual Setup
Auto Setup
System Memory
Sound
Video
Basic
NET/USB
Option
Stereo/Surround
Input Select
Manual Setup
Auto Setup
MD/TAPE
BD/HD DVD
DVD
DTV/CBL
DVR
Antenna Level
Volume Trim
Rename
Antenna Level
96%