Yamaha RX-V3800 - Manual (Page 27)

23
En
Connections
PRE
P
ARA
T
ION
English
Connect your TV (or projector) to the HDMI OUT jack,
the COMPONENT VIDEO MONITOR OUT jacks, the S
VIDEO MONITOR OUT jack or the VIDEO MONITOR
OUT jack of this unit.
y
You can select to play back HDMI audio signals on this unit or on
another HDMI component connected to the HDMI OUT jack on
the rear panel of this unit. Use the “Support Audio” parameter in
“Option” to select the component to play back HDMI audio
signals (see page 98).
• Some video monitors connected to this unit via a DVI
connection fail to recognize the HDMI audio/video signals
being input if they are in the standby mode. In this case, the
HDMI indicator flashes irregularly.
• Set “Conversion” in “Video” to “On” (see page 89) to display
the short message displays.
• The GUI screen appears with the wall paper or gray background
depending on the input video signal format and the setting of
the parameters in “Wall Paper” (see page 91).
• If the connected video monitor is compatible with the automatic
audio and video synchronization feature (automatic lip sync
feature), this unit adjusts the audio and video timing
automatically (see page 87). Connect the video monitor to the
HDMI OUT jack of this unit to use the feature.
Connecting a TV monitor or projector
Make sure that this unit and other
components are unplugged from the
AC wall outlets.
Notes
VIDEO
S VIDEO
MONITOR OUT
VIDEO HDMI COMPONENT VIDEO
MONITOR OUT
Y
P R
P B
OUT
P R P B
V
S
Y
TV
(or projector)
Video in Component video in
S-video in HDMI in
indicates recommended connections
indicates alternative connections