Yamaha RX-V3800 - Manual (Page 73)

69
En
Using Network/USB features
BA
S
IC
OPERA
T
ION
English
4
Press desired numeric buttons (1-8) (6).
The number of the selected numeric button appears in
the video monitor or front panel display.
5
Press 4
ENTER or 5MEMORY to confirm
the preset.
■ Select an item by using numeric buttons
(1-8) (6)
1
Press 1
NET/USB to select “NET/USB” as
the input source.
2
Select the desired sub input source.
3
Press one of the numeric button (1-8) (6)
which the desired item is assigned to select
the item as the input source.
The selected preset number appears in the front panel
display, and this unit starts the playback of the source
assigned to the selected numeric button.
• “Empty Memory!” appears in the front panel display and
the short message display when you press the numeric
button (1-8) (6) to which no items are assigned.
• This unit does not recall the correct item assigned to the
selected numeric button (1-8) (6) in the following cases:
– the connected USB device is incorrect.
– the PC or MCX-2000 which stores the selected item is
turned off or disconnected from the network.
– the selected Internet Radio station is temporary
unavailable or out of service.
– the directory of the selected item has been changed.
y
This unit stores the relative position of the preset items in a
directory or playlist, and does not recall the correct item by
using numeric buttons (1-8) (6) if you add or delete music
files to or from the same directory or playlist as the preset
items. In such cases, preset the desired item to the numeric
buttons (1-8) (6) again.
We recommend the following methods:
PC server/MCX-2000
Create eight playlists which contain the desired items, and
then preset the top item of each playlist to the numeric
buttons (1-8) (6). When you change the items which are
preset to the numeric buttons (1-8) (6), replace the
registered items in the playlist with the desired items
without deleting the playlist.
USB memory devices
Create eight directories which contain the desired items in a
directory beside the directory which contains all music files,
and then preset the top item of each directory to the numeric
buttons (1-8) (6). When you change the items which are
preset to the numeric buttons (1-8) (6), replace the items in
the directory to the desired items without deleting the
directory.
Before performing the following operations, set the operation
mode selector on the remote control to DSOURCE.
Notes
MEMORY
CD-R CD PHONO MULTI CH TUNER XM MD/TAPE BD/HD DVD DVD NET/USB DVR DTV/CBL VCR V-AUX
1 : P C / M C X
Flashes Selected preset number
CD-R CD PHONO MULTI CH TUNER XM MD/TAPE BD/HD DVD DVD NET/USB DVR DTV/CBL VCR V-AUX
1 : P C / M C X
Selected preset number