Yamaha RX-V3800 - Manual (Page 28)

24
En
Connections
• When “Conversion” is set to “Off” (see page 89), be sure to
make the same type of video connections as those made for
your TV (see page 23). For example, if you connected your TV
to the VIDEO MONITOR OUT jack of this unit, connect your
other components to the VIDEO jacks.
• When “Conversion” is set to “On” (see page 89), the converted
video signals are output only at the MONITOR OUT jacks.
When recording a source, you must make the same type of
video connections between each component.
• To make a digital connection to a component other than the
default component assigned to each DIGITAL INPUT or
DIGITAL OUTPUT jack, select the corresponding setting for
“Option”, “Optical Output”, or “Coaxial Input” in “I/O
Assignment” (see page 82).
• If you connect your DVD player to both the DIGITAL INPUT
(OPTICAL) and the DIGITAL INPUT (COAXIAL) jacks,
priority is given to the signals input at the DIGITAL INPUT
(COAXIAL) jack.
■ Connecting a Blu-ray Disc or HD DVD player
Connect your Blu-ray Disc or HD DVD player to the HDMI IN1 jack of this unit to perform the features of the Blu-ray
Disc or HD DVD completely.
Connecting other components
Notes
Make sure that this unit and other
components are unplugged from the
AC wall outlets.
VIDEO
S VIDEO
VIDEO HDMI COMPONENT VIDEO
DIGITAL INPUT
BD/
HD DVD
OPTICAL
5
BD/HD DVD BD/HD DVD
Y
P R
P B
BD/
HD DVD
A
R
L
IN1
L R
O V S P R P B Y
Blu-ray Disc or
HD DVD player
HDMI out
Component out
S-video out Video out
Optical out
Audio out
indicates recommended connections
indicates alternative connections