Xerox 480cx - Manual (Page 136)

4-4 Receiving a Fax
Receiving Automatically in FAX Mode
1 Press the Receive button until the display indicates FAX.
2
When a fax call comes in, the machine answers on the second ring and
receives the fax automatically.
Note: To change the number of rings before the machine answers an
incoming call, see
Selectable Options on page 1-52.
To adjust ringer volume, press the Menu button and the System Setup (04)
button on the One-Touch keypad. Ringer volume is the first item displayed.
Press the Start/Enter button. Use the Up or Down button to set the desired
loudness. Press the Stop button twice to accept and exit.
Receiving Automatically in TEL/FAX Mode
If you have an external phone connected to the EXT jack on the left side of
the machine, you can select TEL/FAX mode to receive fax transmissions
and answer voice calls.
1 Press the Receive button until the display indicates TEL/FAX.
2
When a call comes in, the machine answers on the second ring. If a fax
tone is sensed, the machine receives the fax automatically.
Print the 480cx User Guide